What to Do When Your Cloth Dryer Drum Won't Spin
With modern advances in technology, the cloth dryer is no longer the chore it once was. The dryer drum's spinning action is central to the machine's effectiveness and if it unexpectedly stops spinning, it can be a nuisance. This article outlines the potential reasons and solutions to this problem.
There are a few reasons why your cloth dryer drum might not be spinning, one of the most common being a problem with the motor. If this is the case, it is usually accompanied by a burning smell as the armature brushes within the motor have passed their service life and have worn down to the point of no longer being able to make contact with the rotor.
It is also possible the issue isn’t with the motor itself but the drum belt. Over time, the belt may have become stretched, cracked, or broken. If this has happened, it will have to be replaced in order for the drum to start spinning correctly again.
Another potential cause of failure can be attributed to the non-drive end roller. This component is tasked with supporting the dryer drum and its unsupported weight will cause it to eventually become too worn or blocked with lint, thus preventing it from spinning. In this case, you'll need to replace the roller before re-starting the cycle.
Troubleshooting the Issue
If you hope to remedy the situation yourself, start out by disconnecting the power cord from the dryer. If you’re not familiar with electrical systems, it’s best to seek professional advice and call a local appliance repair company for help.
Regardless of who solves the problem, the first step is to make sure the lint trap is not blocked. Blocked lint traps are notorious for preventing air from being circulated into the drum thus preventing it from spinning. Therefore, it’s best to check the lint trap and clean it.
If cleaning the lint trap doesn't help, then carefully remove the back panel of the dryer. It's here where you'll be able to inspect the motor itself and the drum belt. Make sure all contact points are in position and that the belt is sound.
Possible Motor Problems
If the contact points of the motor have worn away, you'll need to clean and make sure the contact points are still making proper contact with the rotor. If so, then you can simply retrace your steps and re-assemble the panel and start up the cycle.
However, if the armature contacts are indeed worn away, you'll need to replace the motor for the dryer to start working again.
Possible Issues with the Drum Belt
Inspecting the drum belt shouldn't be too hard. Start by lifting the front panel of the dryer and you should be able to see the belt between the motor and the dryer drum. Make sure the belt isn't stretched or twisted and that it still has some tension.
If the belt has stretched, then you'll need to replace it with a new one. However, if the belt was broken or twisted, then you'll need to replace it as well and make sure to tighten the motor belt tension.
Issues with the Non-Drive End Roller
If the drum belt is intact, you'll also want to check the non-drive end roller to make sure it isn't cracked, blocked, or bent outward. To do so, you'll need to use a flashlight and search for any signs of cracking or grooves on the roller. This can usually be found just behind the dryer door.
If the roller looks unharmed and isn't blocked, then you can attempt to adjust its tension by tightening the mounting nut a few turns to the right, which should increase its current tension.
If your cloth dryer drum won't spin, it can be a nuisance as it prevents you from completing your laundry cycle. There are a few potential causes of this problem, ranging from a motor problem, a broken drum belt, or a worn-out non-drive roller.
Before assuming the worst and calling a professional, take some time to inspect the motor, drum belt, and the non-drive end roller to make sure they are not blocked, cracked or worn out.
For any issues you can’t fix or if the problem persists, call Local Reliable Appliance Repair to assist with any repair or installation needs.
If you wish to read more information about
Cloth dryer not spinning, please visit this page.
Cloth Dryer Not Spinning: Preventive Actions
It is recommended to take preventive action to avoid issues with a cloth dryer not spinning. These steps will help extend the life of the dryer and reduce costly repairs.
Unplug the dryer – Unplug the cloth dryer from the power source, and gently clean the lint filter with a brush or vacuum. Clean the area around the filter door and the filter gasket to improve air flow.
Clean the dryer vent hose and duct – Make sure that the dryer vent hose is securely connected and the full length of the hose and the entire duct system is free of lint build-up. Check the outside vent and use a vacuum to remove any lint buildup in the ducts.
Check the drum and belt – Inspect the inside of the cloth dryer and check the condition of the drum and the belt. Inspect the belt for any damage and make sure that the drum is turning freely.
Replace any worn or damaged parts – If any parts of the dryer are worn or damaged, they should be replaced before attempting to use the dryer.
Check the dryer leveling – Make sure the dryer is level. Use a level or the manufacturers recommended recommended leveling technique to ensure the dryer is level.
Call for Professional Assistance – If you are not comfortable performing any of these preventive steps, it is best to call a local reliable appliance repair service such as Local Reliable Appliance Repair. A professional technician can inspect the dryer, replace any worn or damaged parts, and provide tips to keep the dryer running safely and efficiently.
Average Repair Cost for "Cloth Dryer Not Spinning"
Most people don't know where to start when it comes to repair costs for
Cloth dryer not spinning issues. In San Diego, the average repair cost depends on the type of repair needed and the parts required. Labor is usually charged between $80 and $150 per hour.
Fortunately, you can get reliable help by calling
Local Reliable Appliance Repair at
<a href="tel:(866) 516-1222">(866) 516-1222</a>. The minimum repair or installation cost is usually around $140 and the complex repair or installation can range up to $250.
The most common parts replaced in such repairs include belts, drum rollers, motors, and bearings. Belts will often cost between $75 and $150. Drum rollers cost between $50 and $100. Motors cost between $150 and $200. Bearings cost between $45 and $135.
When it comes to labor, the cost is typically calculated using the hourly rate. The cost of the parts is added to the cost of the labor.
In some cases, materials such as specialty tools or lubricants may be required for the repair. The cost of the materials depends on the part and the materials used.
While the average repair cost for a
cloth dryer not spinning issue in San Diego can range from $140 to $250, the cost will depend on the parts, tools, and labor required. You can get reliable help by calling
Local Reliable Appliance Repair at
<a href="tel:(866) 516-1222">(866) 516-1222</a>.
Repairing a Cloth Dryer Not Spinning
Cloth dryers aren't known for having a long lifespan. Over time, lint buildup and other common problems can cause thedryer to stop spinning, making it a safety hazard as well as an inconvenience. Fortunately, there are experienced professional technicians you can contact to help get your dryer spinning again.
For fast and reliable service, you can contact Reliable Appliance Repair. They are a family-owned local HVAC and appliance repair company dedicated to providing excellent customer service at an affordable price.
When you contact Reliable Appliance Repair, you'll receive fast, reliable service from technicians with a minimum of 5 years of experience in the field. Not only do they have extensive experience dealing with cloth dryers not spinning, they also offer same-day services and fair pricing.
In addition, Reliable Appliance Repair is licensed and insured, so you can be sure the job will be done right. Plus, as a first-time customer you can get $25 off labor!
If you're dealing with a cloth dryer not spinning, don't waste your time or risk your safety by attempting to repair it yourself. Contact the experienced technicians at Reliable Appliance Repair for fast, reliable service. They're the top choice for HVAC and appliance repairs in the San Diego area.
FAQ: What to Do When Your Cloth Dryer Drum Won't Spin
Q: What are the Signs That My Clothes Dryer Drum Won't Spin?
If your clothes dryer drum won't spin, you'll usually notice right away — typically, wet clothing is still in the drum after a cycle completes. You may also notice a burning smell, or hear grinding or thumping noises coming from the dryer.
Q: What Could be Causing My Clothes Dryer Drum to Not Spin?
If your dryer's drum won't spin, the cause could be anything from a broken belt to a misaligned drum or a faulty timer. To identify the problem, you'll need to do some troubleshooting.
Q: How Do I Troubleshoot My Clothes Dryer Drum?
First, you should make sure the dryer is plugged in and the power switch is turned on. Then, check the wiring. Make sure it is connected properly. A faulty wiring job can cause the body of the dryer to be too hot and overheat the motor. Lastly, check the direction that the belt wraps around the drum.
Q: How Do I Check the Belt in My Clothes Dryer?
To check the dryer belt, open the top, back, or side door and inspect the drive belt. If it is loose, cracked, frayed, or broken, it will need to be replaced.
Q: What If I Find Something Else is Wrong with My Clothes Dryer?
If the belt seems fine, other parts of the dryer could need repair or replacement. It's a good idea to contact a qualified appliance repair technician.
For prompt and reliable service, call Local Reliable Appliance Repair at (866) 516-1222.