Reliable HVAC & Appliance Repair (866) 516-1222

Licensed HVAC & Appliance repair expert service

Why Your Dryer Is Not Turning On Troubleshooting Guide

Why Your Dryer Is Not Turning On: Troubleshooting Guide

with the corresponding anchor text

Why Your Dryer Is Not Turning On: Troubleshooting Guide

Has your dryer stopped working? A broken dryer can be annoying and inconvenient, but fortunately, it can also be relatively simple to troubleshoot and repair. In this guide, we'll cover the most common causes for a dryer not turning on and how to remedy them.

Check the Circuit Breaker

Before you start investigating within your dryer, ensure the power source is working correctly. If the power is on, check the circuit breaker. It should be in the ON position; if not, switch it back ON or replace the fuse. You may also need to reset the circuit breaker. It's always worth double checking to make sure the circuit breaker is in the correct ON position before you assume something is wrong with the dryer itself.

Inspect the Power Switch and Plug

If the dryer is still not turning on, it's time to start looking at the appliance itself. Head to the back of the dryer, unplug it and take a look at the power switch located near the power cord. To make sure the power is flowing through, you can use a circuit tester or multimeter to check the terminals of the power switch.

If the switch is intact and functioning, the next step is to check the power cord. Make sure the plug is firmly connected to the wall outlet. In some cases, items can press against the power cord and keep it from making a full connection. Test the outlet itself by plugging in a lamp or other working appliance and make sure it's in working order.

Clean the Lint Filter

The lint filter in your dryer must be cleaned each time you run a drying cycle. If the lint filter is packed with lint, that could prevent the dryer from turning on. To clean the filter, simply remove it and wipe away the lint buildup with a damp cloth. If the filter is especially dirty, submerge it in warm water and dish soap to soak for fifteen minutes. Once the filter is clean, put it back into place and try out the dryer again.

Reset the Dryer

If all else fails, the last step you can take is to reset the dryer. Unplug the dryer, wait thirty seconds and plug it back in. This should reset the dryer and spur it back to life. If the reset doesn't work and the dryer is still not turning on, then it may be time to call in a professional appliance repair technician to inspect and repair your dryer.

Tips for Maintaining Your Dryer

Preventative maintenance is the best way to keep your dryer running correctly for a longer period of time. To maintain your dryer and avoid any inconvenient breakdowns in the future, keep these tips in mind:
• Regularly check and replace old or damaged dryer vents.
• Clean the lint filter with each cycle.
• Check your dryer regularly for loose screws or other issues with the outside of the machine.
• Keep the inside and outside of the dryer free from dust and debris.
• Inspect your dryer vent hose for obstructions or blockages
• Make sure the dryer vents away from your home, not within it.
• Check for lint in the vent pipe of your dryer

Having an issue with your dryer not turning on can be inconvenient, but having a reliable game plan for troubleshooting the problem can save you time and money. For more information about dryer repairs in San Diego, click here. If you still can’t get your dryer working, contact Local Reliable Appliance Repair at (866) 516-1222.

Why Your Dryer Is Not Turning On: Troubleshooting Guide
Why Your Dryer Is Not Turning On: Troubleshooting Guide
Why Your Dryer Is Not Turning On: Troubleshooting Guide

Tips to Avoid Dryer Not Turning On

In San Diego, it is important to take preventive action to avoid dryer not turning on issues. Below are a few recommended steps to ensure smooth and continuous operation of your dryer:
1. Make sure that the power cord is plugged in and firmly connected. Check if the power from the outlet is running and is not tripped or overloaded. If the power cord itself is damaged, replace it or call an appliance or HVAC technician for assistance.
2. Ensure the start switch is in the "on" position. Check for any stuck buttons or sensors, as sometimes dirt and lint buildup can prevent the switch from functioning properly.
3. Check that the timer is set to the correct cycle. If the timer is not properly set, the dryer will not start.
4. Ensure the door is completely closed. The dryer will not turn on if the door is not completely closed and latched.
5. Make sure the lint filter is properly in place. A blocked lint filter can cause the dryer to overheat and prevent it from functioning correctly.
6. Check that the vents are clear. If the vents are blocked, the dryer will not dry properly and can cause it not to turn on.
7. Clean the dryer on a regular basis. Dirt and debris buildup can result in various problems, including the dryer not turning on.

If any of these steps do not resolve the issue, it is advised to call a local appliance or HVAC technician for assistance.

Dealing With a Dryer Not Turning On in San Diego

If your dryer in San Diego isn't turning on, it could be due to an issue with the power, an issue with the drum, or a mechanical issue that requires repair. To ensure a successful repair, it is best to consult an experienced appliance repair company, such as Local Reliable Appliance Repair at (tel: 866-516-1222).

Costs for repairing a dryer in San Diego vary depending on the complexity of the problem, the necessary parts and labor, and the quality of materials used.

Common dryer repairs may include:
– Replacing thermostats or thermostat wiring
– Changing a motor or motor capacitor
– Replacing a drum belt
– Replacing a blower wheel or blower wheel motor
– Repairing loose wiring or damaged electrical components

For minor repairs, the cost of labor and parts may range from $150 – 300 in San Diego. The cost can also vary depending on the model of the dryer and the company performing the repair.

Costs for more complex repairs, such as replacing an entire motor or a complete system overhaul, may range from $250-$600, depending on the parts required and the complexity of the repair. During complex repairs, the technician may find additional issues, leading to additional labor costs or parts.

It is also important to consider the cost of materials in any repair job. Depending on the manufacturer, the cost of dryer replacement parts may range from $75 – $400. This cost can be higher for higher-end dryers.

It is important to note that price should not be the only factor considered when choosing an appliance repair company. Doing research to ensure that the company is reliable, experienced and licensed is also important.

At Local Reliable Appliance Repair, you can be sure you're dealing with an experienced and licensed technician who will ensure that your dryer is repaired properly and quickly. Contact us today at (tel: 866-516-1222), or visit our website,, to learn more about our services.

Dryer Not Turning on? Contact Reliable Appliance Repair

The electrical wiring and components in a dryer can experience wear and tear over time, making it difficult to turn the dryer on. If you have a dryer that won't turn on, then it's time to consider the services of a professional appliance repair service.

At Reliable HVAC and Appliance Repair in San Diego, we are proud to be a local, family-owned company with experienced technicians who have at least five years in the business. We provide full HVAC and appliance repair services, including whenever your dryer is not turning on.

Reliable recognized the importance of providing same-day services for our customers, which is why we guarantee same-day repair and installation in most cases. We are licensed, insured, and proud to offer fair and affordable pricing for our services. When you choose Reliable for your appliance repair needs, you can be sure that you are working with a reputable service provider who will get the job done right.

For our first-time customers, we also offer $25 off labor. Put your appliance repair worries aside, and trust Reliable HVAC and Appliance Repair with taking care of your dryer. Contact us today at tel:(866) 516-1222 and get your dryer up and running in no time.

FAQ: Why Your Dryer Is Not Turning On

Q1. Is electrical power reaching the dryer?

Yes, start by checking if power is reaching the unit. Make sure the plug is secure and the circuit breaker is not tripped.

Q2. Are the dryer vent valves blocked?

The dryer vent valves should be cleaned and checked for blockages. If these are damaged or blocked, it'll cause the unit to shut down.

Q3. Is the start button working?

To see if the start button is functioning, press and hold it for 10 seconds. If it doesn't turn on, you may need a replacement.

Q4. Are the proper settings in place?

Check the thermostat, timer, and other settings. Temperature settings and timer settings may need to be adjusted for the dryer to turn on.

Q5. Are the door and latch working?

Check if the door's seal is snug and if the door latch is working correctly. Additionally, the door switch needs to be in the right position for the dryer to turn on.

If you have tried all these solutions and your dryer is still not turning on, call Local Reliable Appliance Repair at (866) 516-1222 for professional help.