Reliable HVAC & Appliance Repair (866) 516-1222

Licensed HVAC & Appliance repair expert service

DIY Furnace Repair Guide Fix Your Furnace Quickly and Easily

DIY Furnace Repair Guide: Fix Your Furnace Quickly and Easily

DIY Furnace Repair Guide: Fix Your Furnace Quickly and Easily

Your furnace is an essential part of your home and keeping it in good working order is a must. Sadly, furnaces don't last forever, and sometimes they need a little help to get them running again. If you're having trouble with your furnace and don't want to wait for a professional to come and repair it, this guide will help you troubleshoot and complete your own DIY furnace repair.

The process of repairing a furnace is not an easy one, but with a little know-how, you can fix your furnace with relative ease. This guide will help you identify what's wrong with your furnace and provide instructions on how to fix it.

Identifying the Issue

The first step to fixing your furnace is finding out what is wrong with it. This is the most important part of the process, as it will allow you to diagnose and repair the issue quickly and efficiently.

If your furnace is making strange noises or smells, or is not producing enough heat, the issue is likely something simple like a clogged filter, a faulty switch, or a broken belt. These minor issues can be easily fixed without the need for an expensive technician.

Another common issue is a worn or broken fan belt. If the fan belt is broken, it can cause your furnace to emit a burning smell, or stop working altogether. If the belt is worn, it may need to be replaced.

In some cases, a furnace may not produce enough heat due to low airflow. Low airflow can be caused by a dirty or blocked filter, a clogged blower motor, or a broken igniter. If you can't figure out the source of the problem, you may need to have a professional take a look at it.

Repairing the Issue

Once you've identified the issue with your furnace, you can start on the repair process. Here are some tips to help make your repair job easier:

  • Be sure to turn off all power to the furnace before beginning any repairs.
  • Use the manufacturer's repair guide to understand the specific parts of the furnace, and how they fit together.
  • Wear safety goggles and gloves to protect yourself from fire and other hazards.
  • Take photos of the furnace before you begin the repair, to help with the reassembly process.
  • Test the furnace after making any repairs, to make sure it's working properly.

Cleaning the Filter

The most basic repair for a furnace is to clean or replace the filter. A dirty filter can limit the airflow and reduce the efficiency of the furnace. Unscrew the filter from the unit, remove it, and then vacuum out any dirt or debris that has accumulated. After cleaning the filter, reinsert it into the unit.

Replacing the Belt

If your furnace is making a loud squealing noise, the belt may be worn or broken and need to be replaced. First, shut off power to the unit, then remove the cover and inspect the belt. If it appears to be worn or broken, replace it with a new belt of the same size and type.

Replacing the Igniter

If your furnace isn't producing enough heat, it could be due to a broken igniter. To replace the igniter, remove the cover and locate the igniter. Unscrew the igniter and remove it, then insert the new igniter and screw it into place.

Fixing a Blocked Motor

If the furnace isn't producing enough air flow, the motor may be blocked. To fix this issue, shut off power to the unit, then remove the cover and inspect the blower motor. If it is blocked, use a vacuum to dislodge the blockage. Once the blockage is gone, reassemble the unit and test the furnace to make sure it is functioning properly.


Fixing your own furnace is a risky endeavor, but with the right knowledge and tools, you can complete the job quickly and easily. By following this guide, you'll be able to identify the issue, take the necessary steps to fix it, and make sure everything is operating properly. If, after following this guide, you discover that something is still wrong with your furnace, call a reputable, local appliance repair technician. They will be able to provide expert advice and help you repair your furnace safely and efficiently.

If you wish to read more information about How to repair a furnace, click here. For expert assistance with your furnace repair, call Local Reliable Appliance Repair at (866) 516-1222 today.

DIY Furnace Repair Guide: Fix Your Furnace Quickly and Easily
DIY Furnace Repair Guide: Fix Your Furnace Quickly and Easily
DIY Furnace Repair Guide: Fix Your Furnace Quickly and Easily

How to Repair a Furnace

When faced with furnace repair issues, it is important to follow manufacturer recommendations and local appliance or HVAC technician’s recommendations for preventive action. Here are some tips to help you troubleshoot, repair, and maintain your furnace:

Check the Thermostat

A faulty thermostat can be the cause of your furnace not working properly. Make sure the thermostat is set to the correct temperature, that the settings are correct, and that the batteries are functioning.

Clean or Replace the Air Filter

If the air filter on your furnace is dirty or clogged, the furnace may not operate efficiently. Clean or change the air filter regularly to ensure the efficiency of your furnace.

Check the Furnace’s Blower

The blower on a furnace can become blocked by dirt or debris. Inspect the chamber to ensure it is clear and debris-free. If it is not, clean the chamber and/or replace the fan blade as needed.

Inspect the Ducts

If the air ducts of the furnace become disconnected or damaged, it can decrease the performance of the furnace. Inspect all air ducts for leaks or any other potential damage to help maintain an efficient furnace.

Test the Fan

The electric motor or motor capacitor may be faulty if the fan has trouble running or stops running. Test the fan motor to ensure it is running efficiently; replace it if necessary.

Check the Flame Sensor

The flame sensor is responsible for keeping the furnace’s flame burning at the appropriate temperature. If this sensor malfunctions, it can cause issues with your furnace. Check the sensor and clean or replace it if necessary.

Test the Pilot Light

The pilot light should be a steady blue flame; if it is not, it may be producing soot or other excess material. Test and adjust the pilot light as needed to prevent further issues.

Following these tips and manufacturer or technician recommendations can help ensure your furnace is running efficiently and that all potential issues are addressed before they become problems.

Advice on Average Repair Cost for Furnace in San Diego

Furnace repair and installation costs in the city of San Diego vary. It can cost anywhere from $45 for a diagnostic fee to upwards of $1500 for a complex repair or installation. To better understand the cost associated with repairing or installing a furnace in San Diego, a detailed itemized list of the parts most commonly replaced, their associated costs and recommendations on how to best proceed are detailed below.

For parts, it is necessary to replace a furnace filter regularly (roughly once per year), as it filters out dust and other particles that can damage the furnace. The average cost of a new filter is approximately $10-$20. A furnace blower motor can cost upwards of $400 to $700 and require a few hours to install. Other parts include thermocouples that cost around $20, igniters from $100-$200, and a limit switch from $50-$100.

Once the parts have been purchased, the labor cost for a furnace repair or installation is typically determined on an hourly basis. The average repair costs in the San Diego area for labor for a repair or installation is about $80-$180 per hour. It’s important to note that specifics like the complexity of the repair and the size of the unit can be factors used to determine whether the cost quote is accurate.

In addition to the cost of parts and labor, it is important to keep in mind that materials such as screws, pipes, wiring and other similar items are required. This can result in an additional cost of approximately $50 to $100, depending on the needs of the repair.

To ensure quality workmanship and safety, the best advice is to contact a reliable local appliance repair company like Local Reliable Appliance Repair. Experts who specialize in furnace repair and installation can provide trustworthy advice and service to ensure long-lasting results.

How to Repair a Furnace

Furnace repairs can seem daunting, but they don’t have to be. It’s important to understand the components of a furnace and the steps to ensure that a problem is correctly diagnosed. With the right knowledge and the help of a local contractor, furnace repair can be both fast and effective.

If you live in the San Diego area, the best contractor to contact is Reliable HVAC and Appliance Repair. They are a family-owned, local company offering same-day service for HVAC and appliance repairs and installations. They have at the very minimum 5 years of experience in the field, and they offer fair and affordable prices. As a first-time customer, you can even get a $25 discount on labor!

Reliable HVAC and Appliance Repair is a licensed and insured HVAC and appliance contractor that has been providing outstanding service to the greater San Diego area for many years. Their technicians are highly trained and have plenty of experience with how to repair a furnace correctly and correctly diagnose issues.

Should you find yourself in need of HVAC or appliance repair services in or around San Diego, dial up Reliable HVAC and Appliance Repair at (866) 516-1222. You can rest assured knowing you’re getting both the fast and effective services you need from a reliable and skilled technician. Plus, you’ll save time and money with their $25 discount for first-time customers.

If you’re living in the San Diego area and you’re in need of furnace repairs, don’t delay contacting the local experts at Reliable HVAC and Appliance Repair. With highly trained and experienced technicians and same-day service, you can rest assured knowing that your furnace will be repaired right—at a fair and reasonable price.


What is the DIY Furnace Repair Guide?

The DIY Furnace Repair Guide is a comprehensive step-by-step guide designed to help users quickly and easily repair their own furnaces.

How does the DIY Furnace Repair Guide help?

The DIY Furnace Repair Guide provides users with in-depth instructions, helpful diagrams, and detailed explanations to make furnace repair quick and straightforward.

What types of repairs can I do with this Guide?

This Guide enables users to repair common furnace issues such as furnace not igniting, furnace not blowing air, and furnace not blowing enough air.

Who should use this Guide?

This Guide is intended for those with basic technical skills who wish to do minor repairs on their own furnaces.

What if the repairs are too complicated?

If the furnace repairs are too complicated, it is recommended that users contact a local and reliable appliance repair service, like Local Reliable Appliance Repair.