Reliable HVAC & Appliance Repair (866) 516-1222

Licensed HVAC & Appliance repair expert service

Trane Furnace Maintenance How to Keep Your Heater Running Smoothly

Trane Furnace Maintenance: How to Keep Your Heater Running Smoothly

Trane Furnace Maintenance: How To Keep Your Heater Running Smoothly

If you want to enjoy a comfortable home in the winter, you need to maintain your Trane furnace. The furnace is the primary source of warmth in homes, and it needs regular attention to make sure it’s running efficiently and effectively. Keeping your furnace well maintained not only ensures your comfort but can also save you money and reduce energy waste.

Getting Started With Maintenance

The first step in maintaining your furnace is to inspect it before the winter season starts so you can identify any potential problems before they become more costly. The inspection should include not only the workings of the furnace but also the ventilation systems that bring fresh air into the home and aid in removing dangerous pollutants from the air. Look for signs of wear and tear in the furnace or any of its components as well as any air leaks. Doing this simple check regularly can prevent costly and dangerous breakdowns.

Ignoring Maintenance Can Lead to Bigger Problems

Without regular furnace maintenance, it’s easy to forget that your furnace needs attention until it’s too late. Not only can doing regular maintenance help you identify any problems before they become bigger issues, but it also helps you keep your furnace running efficiently so you save money on energy bills. Regular maintenance can help extend the life of your furnace, making it a wise investment for the long run.

If the problem is not solved after just the inspection, it’s time to contact a professional HVAC technician for more detailed repairs. They will inspect the furnace and determine the best course of action. This step is important because if the repairs are not done correctly, it can cause further problems with your furnace or even lead to a dangerous malfunction.

Benefits Of Professional Maintenance

Getting professional maintenance for your Trane furnace not only ensures that it runs properly, but also makes you eligible for warranty coverage. This step can save you a lot of money on costly repairs and replacements, as the manufacturer may cover the cost of repairs to the furnace, depending on the warranty.

Professional maintenance can also help you to identify a system that needs replacing. If your furnace is more than 15 years old, it may be time to start thinking about replacing it with a newer, more energy efficient system. Even if your furnace is only a few years old, having it regularly checked by a professional can help make sure it’s running efficiently and reduce the chances of a dangerous malfunction.


Trane furnace maintenance is an essential part of keeping your home comfortable in the winter. Taking the time to inspect and repair your furnace can save you money in the long run and prevent dangerous malfunctions. Getting professional maintenance not only ensures that your furnace is running properly, but also makes you eligible for warranty coverage. If you wish to read more information about Trane furnace maintenance, click here. For any repair or replacement needs, you can rely on your local Reliable Appliance Repair at (866) 516-1222.

Trane Furnace Maintenance: How to Keep Your Heater Running Smoothly
Trane Furnace Maintenance: How to Keep Your Heater Running Smoothly
Trane Furnace Maintenance: How to Keep Your Heater Running Smoothly

Prevenative Trane Furnace Maintenance

PLEASE be sure to follow the steps below to ensure a smoother maintenance experience with your Trane furnace.

  1. Regularly clean and check the air filters. Dust and dirt can accumulate in the filter, reducing air flow to the furnace and increasing the amount of energy it needs to keep your home warm.

  2. Annually clean around the furnace and in the furnace area to ensure that there is adequate airflow around the furnace. This will help to ensure that your furnace is running as efficiently as possible.

  3. Have the blower motor checked by a qualified technician. A blower motor can fail after extended periods of use, creating major problems with your furnace. You should inspect the motor annually to ensure that it is running properly.

  4. Replace the filter on a regular basis. A dirty filter will clog the air flow and cause your furnace to work harder than it needs to. It may also reduce the life of the furnace.

  5. Test the heat exchanger for signs of corrosion or cracks. If you find any, have it replaced immediately to prevent the combustion gases from leaking into your home.

  6. Check flue pipes for any signs of blockage. If a blockage occurs, it can cause the furnace to overheat, resulting in extensive damage.

  7. Have the furnace professionally serviced once a year. This will help to ensure that it is running as efficiently as possible and that any potential problems are identified and addressed before they become major issues.

By following these guidelines, you can help ensure that your Trane furnace continues to run smoothly and efficiently for years to come. Regular maintenance will also ensure that you get safe, comfortable, and efficient heating during the winter months.

Average Trane Furnace Maintenance Cost in San Diego

Maintaining a Trane Furnace in San Diego can be costly. The repair cost depends on the type of maintenance required and it can range from $400 to $1,000 potentially. The cost for installing a Trane furnace can fluctuate between $4,500 and $8,500.

For a Trane furnace repair, the average cost is generally determined by the parts that need to be replaced or installed. Some common parts that often need replacing are: circuit boards, relays, furnaces limits, condensate pump, igniter, control board, flame sensor, t-stat, motor, draft exhaust motor and more.

Labor itself can cost anywhere between $50 to $150 per hour. However, when it comes to a _Trane furnace_installation, labor costs may vary between $80 to $150 per hour. Adding to that, materials and other supplies may cost between $50 and $150 plus additional parts depending on the requirements.

To get the best advice on the cost and repair of your Trane furnace in San Diego, it's advisable to call in a local and reliable appliance repair expert (Reliable Appliance Repair at tel:(866) 516-1222). They would be able to provide reliable and accurate information on your furnace's repair and installation cost.

How Trane Furnace Maintenance Benefits You

Maintaining your furnace is an important part of keeping it in good condition for many years to come. Trane furnace maintenance is especially important, as these systems need to be inspected and serviced regularly to keep them efficient and effective. Working with a trusted HVAC and appliance repair company, like Reliable Appliance Repair, can help you get the furnish maintenance to ensure it is running smoothly and safely.

Reliable Appliance Repair is a family-owned and operated HVAC and appliance repair business conveniently located in San Diego. Our team of highly trained technicians has at least five years experience in the field of furnace repair and maintenance, and they are equipped to meet your Trane furnace maintenance needs. Furthermore, our company is licensed and insured, providing you with the peace of mind that you’re getting quality care for your home’s heating and cooling devices.

Reliable Appliance Repair provides same-day service for furnace maintenance and that can be a great help when the weather starts to cool down and furnaces are getting firing up. We offer competitive and affordable pricing and want to ensure our clients are being taken care of; so, as a first-time customer, you’ll get $25 off labor.

If you’re in need of Trane furnace maintenance, contact Reliable Appliance Repair at (866) 516-1222. Trustworthy, thorough and honest care that comes with the guarantee of same-day service. Let us keeping your Trane furnace running efficiently and effectively all year round.

FAQ on Trane Furnace Maintenance

How often should I inspect my Trane furnace?

Annually – to keep your furnace running smoothly and ensure your safety it's best to inspect and service your system annually.

What should I inspect during a yearly service?

Air filter, blower motor, burners, flames, exchangers, flue and vent connector, exhaust draft, carbon monoxide levels, combustion air supply, heat anticipator, wiring and controls.

What else can I do to maintain my Trane furnace?

Regularly clean or replace the air filter, and make sure the motor and fan are clean and free from dust. Clean the outdoor condenser, check the voltage and amperes of the motors, and make sure all vents are free from obstructions.

What if the air filter needs to be changed?

Always buy the air filter designed specifically for your furnace model. Remove the old filter and replace with the new one, using the same direction of air flow.

What if I find any problems with my Trane furnace?

If you don’t feel comfortable making any repairs, it’s important to call a professional technician. For reliable furnace maintenance and repairs, contact Local Reliable Appliance Repair.