Reliable HVAC & Appliance Repair (866) 516-1222

Licensed HVAC & Appliance repair expert service

What to Do When Your Carrier Furnace Blows Cold Air

What to Do When Your Carrier Furnace Blows Cold Air

What to Do When Your Carrier Furnace Blows Cold Air

Carrier furnaces are energy efficient heaters which are used to keep homes warm during winter months. Unfortunately, sometimes these furnaces may malfunction and begin to blow cold air instead of heat. This can lead to discomfort and wasted energy, so it’s important for homeowners to take the appropriate measures to fix the problem as soon as possible.

Common Furnace Issues

There are a few common issues which can cause a furnace to blow cold air. The most common are a pilot light that has gone out, a malfunctioning thermostat, or a dirty air filter. Other possible causes of the problem include clogged or corroded electric components and a blocked exhaust vent. It’s also possible that the furnace’s heat exchanger is worn or broken, resulting in less warm air being produced.

Checking For Problems

If a homeowner suspects that their Carrier furnace is blowing cold air, they should first inspect the pilot light. If the pilot light is not lit, the homeowner needs to reset it using the manufacturer’s specific instructions. If the pilot light will not relight, the issue could be related to the thermocouple, the small device which senses when the pilot flame is on and off and regulates the gas supply.

The thermostat is another possible source of the problem. This can sometimes be resolved by turning up the thermostat and turning it off again. If the thermostat’s display reads “off” or “lo” when the thermostat is turned on, then the battery may need to be changed.

A dirty air filter can also be the cause of the problem. To determine if this is the case, the homeowner should remove the filter and inspect it. If the filter appears to be dirty, the homeowner should replace it with a clean one.

If after inspecting the pilot light, thermostat, and air filter it appears that none of these are causing the problem, the homeowner should inspect the electric components and exhaust vent of the furnace. If any of these components are corroded or dirty, they can be cleaned with a vacuum cleaner and cloth. If the electric components are beyond repair, they should be replaced. Finally, if the homeowner suspects there is a problem with the heat exchanger, it should be inspected and serviced by a qualified HVAC technician.

Preventing Problems in the Future

To prevent future issues with a Carrier furnace blowing cold air, it’s important that homeowners stay aware of the condition of their furnace and regularly check for problems. This can include checking the pilot light and air filter, as well as regularly inspecting all electric components and the exhaust vent. Additionally, it is important to schedule regular maintenance and tune-ups with an HVAC technician.

If you find yourself in the unfortunate and uncomfortable position of having a Carrier furnace blow cold air in your home, it is important to take quick action to resolve the issue and restore your home’s comfort. Check the pilot light, thermostat and air filter to diagnose the source of the problem and make any necessary repairs or replacements. If the source cannot be identified or addressed, contact a trained and qualified HVAC technician for service. Taking all of these steps can help to ensure long-term proper maintenance and avoid future cold air issues from occurring.

If you wish to read more information about Carrier furnace blowing cold air, click here. For reliable appliance repair in the San Diego area, contact Local Reliable Appliance Repair at (866) 516-1222.

What to Do When Your Carrier Furnace Blows Cold Air
What to Do When Your Carrier Furnace Blows Cold Air
What to Do When Your Carrier Furnace Blows Cold Air

Preventive Action for Carrier Furnace Blowing Cold Air Issues

It is important to take preventive action to avoid potential issues with Carrier furnaces blowing cold air. To ensure the best possible results, both manufacturer recommendations and local Appliance orHVAC technicians should be consulted prior to taking any action on these types of issues. Here are some of the things that should be taken into consideration:

1. Cleaning and Servicing the Furnace

Regular cleaning and servicing is vital for any furnace, especially a Carrier brand. This practice should include complete inspection and cleaning of burners, blowers, and the pilot light, as well as any other areas that need attention. It is important to look for signs of damage or wear and tear, as this can affect the furnace’s ability to blow warm air.

2. Checking Thermostat Settings

It’s also important to check the thermostat settings on the furnace to make sure that it is set correctly and that it is not stuck in the same position. If the thermostat is set to a lower temperature than the actual temperature in the home, the furnace may blow cold air.

3. Cleaning or Replacing the Air Filter

Another critical aspect of preventive action for Carrier furnace blowing cold air issues is the air filter. The air filter should be checked and replaced or cleaned on a regular basis to ensure that the furnace is properly ventilated with clean air. A clogged air filter can not only contribute to cold air issues, but can also cause the furnace to overwork, leading to overheating, breakdown, and other issues.

4. Adjusting the Furnace Flame

In some cases, the furnace flame may need to be adjusted. This should only be done by a qualified technician and should involve carefully inspecting the flame and readjusting it to ensure that it is burning properly.

5. Inspecting and Servicing the Heat Exchanger or Blower Motor

If the furnace is no longer heating properly, it is important to inspect the heat exchanger or blower motor for signs of damage or wear and tear. Both of these components should be serviced and repaired by a qualified technician if necessary.

By following these steps,m it is possible to prevent potential Carrier furnace blowing cold air issues before they arise. While regular furnace maintenance is important, taking preventive action is the best way to ensure that the furnace is operating optimally and that no further issues arise.

Repair Costs for a Carrier Furnace Blowing Cold Air in San Diego

If you are in San Diego and your Carrier furnace is blowing cold air, you may need to call a professional to check and repair the problem. This can be a costly repair, however, knowing the different aspects of what needs to be repaired and replaced can help you understand the costs.

The repair cost of a Carrier furnace depends on the parts needed to fix the problem, labor costs, time to repair the furnace, and materials needed for the repair. The minimum estimated repair cost starts at \$100, and a complex repair can exceed \$400.

Common Parts That Need To Be Replaced
– A flame sensor – \$25 to \$125
– Gas valve – \$50 to \$300
– Blower motor – \$125 to \$1,000
– Thermostat – \$100 to \$200
– Air filter – \$15 to \$30
– Ignition switch – \$50 to \$150

The labor cost of the repair can range from \$50 to \$400 or more, depending on the complexity of the job. You may also need materials such as screws and nuts to replace the parts, which can add to the total repair cost.

For the best advice for repairing your Carrier furnace, you should call Local Reliable Appliance Repair at tel:(866) 516-1222 or visit their website for furnace repairs in San Diego.

A Local Solution for Carrier Furnace Blowing Cold Air

If your Carrier furnace is blowing cold air and you're looking for a reliable, local solution, look no further than Reliable Appliance Repair. This family-owned, San Diego-based HVAC and appliance repair company offers same-day service with highly trained technicians. With a minimum of 5 years experience in the field, you can count on their expertise and fair and affordable pricing.

As a first-time customer, don't forget to ask for $25 off labor to get the most out of your repair. This local, San Diego-based business is licensed and insured to deliver the quality service you expect.

For Carrier furnace blowing cold air issues and more, reach out to Reliable Appliance Repair today or call (866) 516-1222. Let their family-owned business take care of all your HVAC and appliance needs.

Don't wait another second – make the call to Reliable Appliance Repair for fast, affordable and reliable services. Get the peace of mind knowing your problem is being taken care of quickly and professionally.

FAQ: What to Do When Your Carrier Furnace Blows Cold Air

Q: What could be causing my Carrier furnace to blow cold air?

A: Cold air from your furnace could be due to insufficient heating, a thermocouple malfunction, a leaking heat exchanger, or clogged air filters.

Q: What should I do if the air coming out of my Carrier furnace is cold?

A: Start by replacing your air filters, as clogged filters restrict airflow and can cause your furnace to blow cold air. If that doesn't take care of the issue, you may need to examine the thermocouple and heat exchanger for faults.

Q: How do I troubleshoot a thermocouple issue?

A: First, be sure that the pilot light is lit, as lighting the pilot can resolve the issue. Next, use an adjustable wrench to tighten the nut that connects the thermocouple to the pilot assembly, then gently wiggle the thermocouple to determine if the flame size increases. If the flame is still not high enough, you may need to replace the thermocouple.

Q: How do I inspect my heat exchanger?

A: If your heat exchanger is leaking, you will need to arrange for a professional inspection. If you detect any signs of damage, such as rust or cracks, the heat exchanger will likely require replacement.

For more information, or to arrange a professional inspection and repair, call Local Reliable Appliance Repair at (866) 516-1222.