Reliable HVAC & Appliance Repair (866) 516-1222

Licensed HVAC & Appliance repair expert service


DIY Guide: How to Replace a Wall Heater Element

DIY Guide: How to Replace a Wall Heater Element

Replacing a wall heater element may seem like a daunting task, however, with the right tools and careful attention to detail, it can be done without professional help. Before beginning, it’s important to make sure that all safety precautions are taken, and that the work area is clear of any obstructions.

Gather the Tools and Materials Needed

The tools and materials needed for a wall heater element replacement includes gloves, a Phillips-head screwdriver, pliers and a new wall heater element. Have all this useful equipment ready before starting.

Disconnect Power and Remove the Cover

The first step in the process is to safely disconnect the power from the heater’s circuit at the breaker box before doing any work. Next, remove the outer cover to access the electrical components, which can be done easily with a Phillips-head screwdriver. Be sure to remember the location of the screws for easy reassembly at the end.

Inspect the Heating Element

Once the outer cover has been removed, check to make sure that the thermostat is functioning correctly. Carefully inspect the ceramic heating element, located at the very bottom of the heater, for any signs of damage; if it is cracked or chipped, it will need to be replaced.

Install the New Heating Element

Now, it’s time to install the new heater element. First, verify that the power has been shut off and that the unit has cooled down. Carefully disconnect the wires and nuts attached to the old heater element and remove it from the wall. Then, take the new element and attach it back to the wall in the same manner as the old one, being mindful not to overtighten.

Put Everything Back Together

Once the new heating element is in place, double-check that all the connections are secure and the wiring is good. Make sure that the wall is clean and free of debris, and then it’s time to reattach the outer cover and tighten the screws.

You have successfully replaced the wall heater element! If you wish to read more information about Wall heater element replacement, you can visit AC Installation & Repair for assistance. Additionally, if you encounter any issues while doing this yourself, local and reliable appliance repair such as Reliable Appliances Repair can help. They can be reached at (866) 516-1222.

DIY Guide: How to Replace a Wall Heater Element
DIY Guide: How to Replace a Wall Heater Element
DIY Guide: How to Replace a Wall Heater Element

Wall Heater Element Replacement: Preventive Action to Avoid Issues

To avoid wall heater element replacement issues, experienced manufacturers and local appliance and HVAC technicians recommend several preventive actions. These actions include:

  • Regular maintenance: Properly maintain a wall heater by cleaning and changing the filter at least twice a year. Make sure to check the manufacturer's instructions for specific maintenance needs.

  • Check for air leakage: Inspect the air leakage paths regularly for gaskets or cracked insulation that could be causing room air to enter the heat chamber and heat the heater elements.

  • Check the thermostat: Make sure the thermostat is functioning properly by checking for proper voltage and resistance.

  • Check the wiring: Make sure the wiring is properly connected and not loose. Check for bare wires or frayed insulation that could cause an electric shock.

  • Check the safety sensors: Make sure all safety sensors are functioning, such as the limit switch, high-temperature sensor and low-temperature sensor.

  • Check the heat chamber: Inspect the heat chamber for cracks or rust. Make sure the walls of the heat chamber are insulating properly and that the outside air is not entering the chamber.

  • Consult with an expert: If these inspections still come up empty, it is recommended to consult with a local appliance or HVAC technician for further advice and a more thorough inspection.

With the help of these preventive actions, homeowners can help keep their wall heater working properly and reduce the need for element replacement. For further advice, it is best to call a local, reputable and experienced appliance repair technician at (866) 516-1222 for assistance.

Wall Heater Element Replacement Cost in San Diego

Replacing a wall heater element can range in cost depending on the extent of the repair. In San Diego, the average repair cost is generally between $120 to $740, excluding materials and labor.

The cost can vary due to the severity of the repair. In more serious cases such as those requiring the entire heater to be replaced, the workman costs can range from $570 to $740. Minor repairs may only require the replacement of certain components such as burned-out elements and thermostats; these may amount to a fee of $120 to $250.

The complexity of repair depends on a variety of factors, including the type of wall heater and how complicated the wiring is. It is also essential to replace any necessary parts, such as wiring and components, as part of the repair; these items can add to the repair cost.

When it comes to replacing a wall heater element, it is best to seek help from a professional. A trustworthy repair service can provide the most reliable guidance and result in the most cost-effective approach. For optimal repair services in San Diego, consider calling Local Reliable Appliance Repair at (866) 516-1222.

Wall Heater Element Replacement: Trust a Local San Diego Provider

Wall heater element replacement can cause stress and headaches, especially if the job is left to an inexperienced tradesperson. Fortunately, the people of San Diego can trust the local authority on heating repairs: Reliable HVAC and Appliance Repair.

This family-owned business provides top-notch same-day services for all kinds of appliance and HVAC repairs. Their technician team is vastly experienced, with a minimum of five years in the industry. And, their pricing is always fair and affordable.

Not only that, but Reliable is licensed and insured, giving customers even more peace of mind. So, why wait? Whether it's routine maintenance, installation, or wall heater element replacement, the trusted professionals at Reliable HVAC and Appliance Repair have got your back. Contact them today on tel:(866) 516-1222 for reliable same day HVAC and appliance repair services.

FAQ for Wall Heater Element and Wall Heater Element Replacement

What tools do I need to change a wall heater element?
For wall heater element replacement, you will need a flat head screwdriver, a Phillips head screwdriver, pliers, a voltage meter and a replacement element of the same size and wattage as the original.

How do I check to see if the element needs to be replaced?
To check if the wall heater element needs to be replaced, you will need a digital multimeter. Test the resistance of the heating element. If it reads infinite resistance, then it needs replacing.

How do I remove the existing element?
To remove the existing element, first turn off power to the wall heater. Then, use a flat head screwdriver to loosen the wiring terminal screws, remove the screws securing the element if it is attached, and then slowly and carefully disconnect and remove the element from the unit.

How do I install the new element?
To install the new element, first check if it matches the wattage and size of the original element. If so, connect the wires from the element to the wall heater and attach it in place. Finally, secure the wiring screws and complete the wall heater element replacement process.

What can I do if I run into a problem during installation?
If you run into any problems while trying to replace the element, it is best to turn off the power to the wall heater and call a local reliable appliance repair specialist. They can help provide a proper wall heater element replacement.

What is the best number to call for help with replacing a wall heater element?
For reliable help with wall heater element replacement, contact Local Reliable Appliance Repair.