Reliable HVAC & Appliance Repair (866) 516-1222

Licensed HVAC & Appliance repair expert service

Troubleshooting Your Kenmore Microwave Common Issues

Troubleshooting Your Kenmore Microwave: Common Issues

Troubleshooting Your Kenmore Microwave: Common Issues

At Kenmore, we understand how important microwaves are to busy families. They are a staple in the modern kitchen, and when it breaks down it can be a real hassle. Fortunately, in most cases, you can troubleshoot and repair the microwave on your own with a few easy steps.

If you're having trouble with your Kenmore microwave, here are some common issues to check before calling a repair service.

Check The Power Supply

The most common issue with microwaves is power supply problems. Unplug the microwave and check the outlet's connections. Make sure the outlet is functional and then plug in the microwave. If the power supply is fine, the display will light up.

Check The Door Switch

The door switch is a small, plastic part that connects the door to the main control board. If the switch is broken, the microwave won't power up. To check it, open the door and look for the switch. If it's loose or damaged, it should be replaced.

Check The Magnetron

The magnetron is the main component in the microwave. It works by creating an electromagnetic field that heats the food inside. Over time, this part can become worn or damaged and may need to be replaced. To check it, remove the access panel and look for any signs of damage.

Check The High Voltage Capacitor

The high-voltage capacitor is a large, cylindrical capacitor that stores energy. When the microwave is on, the capacitor is charged. If the capacitor is damaged, it won't hold the charge and must be replaced.

Check The Turntable Motor

The turntable motor is responsible for turning the plate inside the microwave. If it is damaged, the plate won't turn and the microwave will produce uneven heat. To check it, unplug the microwave, remove the access panel, and then spin the turntable by hand. If it doesn't spin freely, the motor needs to be replaced.

Check The Main Control Board

The main control board is the main brain of the microwave. If it's damaged, the microwave won't turn on or respond to any commands. To check it, unplug the microwave, and remove the access panel. Then check the board for signs of damage.

If you're still having trouble with your Kenmore microwave, it's best to call a professional. A qualified technician can diagnose the issue and provide assistance with repairs or replacement parts. At Kenmore, we offer a wide selection of quality replacement parts and a team of professionals to help you find the right one.

Troubleshooting Your Kenmore Microwave: Common Issues
Troubleshooting Your Kenmore Microwave: Common Issues
Troubleshooting Your Kenmore Microwave: Common Issues

Kenmore Built-in Microwave Repair: Best Practices for Prevention

No one enjoys the hassle and expense of repairing a malfunctioning appliance, so it is always better to be proactive in preventing the need for repairs to begin with. Below, we’ll provide a few best practices for preventive action to avoid issues with a Kenmore built-in microwave.

Unplug the Microwave When Not in Use

To avoid electric shock or overheating, it is always a good idea to unplug the microwave when it is not being used. This is especially important for built-in microwaves, as not disconnecting them could lead to short-circuiting or other potential issues.

Install GFCI (Ground Fault Circuit Interrupter)

For the safety and security of your home, it is always a good idea to install a GFCI (Ground Fault Circuit Interrupter) to your Kenmore built-in microwave. This device is available at most hardware stores and is designed to shut off the electric power in your system if ever a dangerous voltage passes through it.

Clean the Microwave

The inside of your microwave should be cleaned and defrosted regularly to ensure it is running properly and efficiently. It is also important to check the condition of the cord and plug for any signs of damage.

Clean the Exterior

The exterior of your microwave should also be given regular attention and can be wiped down with a damp cloth to ensure that it is not harboring any dirt or debris between its plastic or metal casing.

Use the Appropriate Type of Bulb

Make sure to use the appropriate type of bulb when replacing a light bulb in your Kenmore built-in microwave. Incandescent bulbs can cause the microwave to overheat and damage the internal mechanisms.

Seek Professional Assistance Before Making any Repairs

If your Kenmore built-in microwave does start to malfunction, it is always best to leave any repairs to the professionals as attempting self-repairs could void the warranty or cause further damage.

By following these simple tips and taking preventive action to ensure your Kenmore built-in microwave is running efficiently, you can help to avoid costly repairs and extend the life of your appliance.

Repair Cost of Kenmore Built-in Microwave Repair Service in San Diego

If you are facing problems with your Kenmore built-in microwave, repair or installation cost can vary depending on certain factors. General repair or installation cost in San Diego can range anywhere from $50 to $200. The complex repair cost may include more and can go as high as $400 depending on the problem.

Below is a detailed itemized list of components that may be required. Additionally, labor cost, materials cost, and any other details that need to be considered to understand the total cost will also be discussed.

  • Motor and fan replacement: $50-$100
  • Digit control panel replacement: $100-$200
  • Heating element replacement: $75-$200
  • Control board replacement: $200-$300
  • Touchpad replacement: $50-$250
  • Door latch replacement: $50-$150

Labor cost in San Diego is around $50-$75 per hour. This cost is charged for repairing any parts and is then added to the total cost of repair or installation. Materials cost can be between $50-$250 or more depending on the part you need to replace. Parts can also come with a warranty depending on the vendor and appliance age.

It is recommended to call a local reliable appliance repair service like Local Reliable Appliance Repair at (866) 516-1222 for further assistance in diagnosing and resolving your issues. They have a variety of services they provide and they can provide an assurance on parts and labor that they provide.

Dependable Kenmore Built-In Microwave Repair

The reliable professionals at Reliable Appliance Repair are the go-to source for Kenmore built-in microwave repair. As a local San Diego HVAC and appliance repair company, they offer same-day services, as well as a wide range of services and special offers like $25 off labor for first-time customers.

Reliable Appliance Repair employs only highly-trained and experienced technicians who are each certified and have a minimum of five years experience in the field. Any kind of Kenmore built-in microwave repair job is possible, with top quality service and fair and affordable pricing. The company carries the proper licensing and insurance so that customers can have peace of mind.

No matter how complex a Kenmore built-in microwave repair job may be, the professionals at Reliable Appliance Repair can handle it quickly and economically. They specialize in same-day services and ensure that each job is completed to customers' satisfaction.

Reliable Appliance Repair is a family-owned business with a commitment to providing the best in Kenmore built-in microwave repair. Customers can trust their experience and expertise for any repair job, and their affordable rates make them the perfect choice for any budget. For ultimate convenience, customers can obtain service by calling (866) 516-1222.

When it comes to superior quality service and dependable Kenmore built-in microwave repair, the professionals at Reliable Appliance Repair have the experience and expertise to exceed customer expectations and complete any job, quickly and economically.

FAQ about Troubleshooting Your Kenmore Microwave: Common Issues and Kenmore Built-in Microwave Repair

What causes my Kenmore microwave to start smoking?

Smoke emitting from a Kenmore microwave is often caused due to a malfunctioning fan motor, a blocked vent, or a faulty door seal. Cleaning the fan motor and using a multi-meter to check if the fan motor is receiving power can help resolve the issue.

What are the most common Kenmore microwave repairs?

The most common Kenmore microwave repairs include repairing the microwave's door, replacing the door switch, cleaning the blower motor, servicing the thermostat, and replacing the high voltage diode.

How can I reset my Kenmore over-the-range microwave?

To reset your Kenmore over-the-range microwave, first, unplug the microwave from the wall outlet. Wait one minute, then plug it back in again. This will reset all troubleshooting codes and help restore the microwave to its default settings.

My Kenmore microwave is making loud or unusual noises. What could be causing this?

Noises from a Kenmore microwave can be caused by a malfunctioning fan motor, a broken turntable assembly, or worn-out bearings and bushings. Repairing or replacing the components causing the problem can help resolve the issue.

How can I tell if my Kenmore built-in microwave needs repairs?

The most common signs that your Kenmore built-in microwave needs repairs are repeated failure to heat food, an excessively hot exterior, and a noisy or smoky interior. If you notice any of these signs, it is recommended to contact a professional appliance repair technician for assistance.

If you are experiencing any common issues with your Kenmore microwave, we recommend calling Local Reliable Appliance Repair at tel:(866) 516-1222 for assistance.