DIY Guide: How to Replace the Control Board on Your Kenmore Refrigerator
Replacing a control board on your Kenmore refrigerator can often be a daunting task. Not only is it difficult to remove the defective board, but also to install the new one as well. Fortunately, this guide provides step-by-step instructions to replace a Kenmore control board without any difficulties.
Important Precautionary Procedure
Before unplugging or accessing the control board of your Kenmore Refrigerator, wear protective gloves or cover your hands with a cotton cloth. This will protect your hands from any unexpected electric shock.
Shutting Off the Power to the Refrigerator
The first step to replacing the control board of your Kenmore refrigerator is to turn off the power to the appliance. Unplug the power cord from the wall outlet and make sure the power is completely off. Do not forget to turn the refrigerator off at the main switch. If the refrigerator is connected to a power surge protector, make sure to turn that off as well.
With the power to the refrigerator off, next is to detach all the equipment connected to the control board. The refrigerator must be disconnected from the outlet and all equipment connected to it. Carefully remove any wrapping materials and electrical parts such as wires, connectors, housings, and slots used to connect to other electrical components.
Removing the Control Board
Before removing the control board it is essential to take the right steps to keep yourself safe. This includes unplugging the refrigerator again, ensuring that the main power is off, and then disconnecting the refrigerator from any other electrical devices such as the water inlet valve, ice maker, water filters, etc. After taking all the necessary precautions, locate the control board on the back of the refrigerator and remove it by unscrewing the mounting screws.
Installing the New Control Board
The new control board must first be properly connected to the receptacles and then secured with the mounting screws. Make sure all connections are secure, including any wires or connectors. Finally, plug the power cord back into the wall outlet and switch on the refrigerator at the main switch.
Testing the New Control Board
To ensure the new control board is functioning, go through the refrigerator settings and test all the features for proper operation. Check that the thermostat is working and the temperature settings are accurate. The Functions that are built with modern day refrigerators need to be tested as well, such as the power-off and power-on times, the cold temperatures and the ice making functions.
If all of the functions are working properly, then the control board has been successfully replaced.
If You Need Additional Assistance
If you have finished the steps above and have any problems with installing the new control board or have any other appliance issues, it is recommended to hire a professional to get the job done safely and correctly. Local Reliable Appliance Repair is a reputable appliance repair in the San Diego area. With over 15 years of experience, their knowledge and expertise will ensure your refrigerator gets the job done accurately and efficiently. If you wish to read more about Kenmore refrigerator control board replacement, click here. For a free estimate, Call Local Reliable Appliance Repair at (866) 516-1222 today.
Kenmore Refrigerator Control Board Replacement: Best Practices
Preventive action to avoid Kenmore refrigerator control board replacement issues can be achieved through certain best practices and manufacturer recommendations. Here are a few itemized steps to help avoid costly replacement of control boards:
Check the wiring connections. Carefully inspect the wiring connections between the control board and the refrigerator thermistor, air fan, and the other components. Securely attach all loose wiring and ensure they are properly insulated.
Perform regular cleaning. Remove dust and lint build-up from and around the control board and its components. This should be done every 3 months or as recommended by the manufacturer.
Optimize the refrigerator's environment. Make sure the location of the refrigerator is not in an area that has excessive heat or direct sunlight. Ensure it is located in a well-ventilated area and the doors are not kept open for an extended period of time.
Replace old parts. Replace any worn-out or damaged components like switches, capacitors, and relays as soon as possible. Doing this regularly can increase the life cycle of the control board and prevent unexpected breakdowns.
Call a professional. If you are facing issues with the control board or its components, it is critical to call a licensed, experienced refrigeration technician immediately. They will be able to diagnose the right problem and fix the issue.
Taking preventive action and following the above best practices can go a long way in avoiding Kenmore refrigerator control board replacement issues. If you are still facing any trouble with the control board, it is important to get professional help from a reliable appliance repair contractor.
For expert advice and repair services, you can contact Local Reliable Appliance Repair at (866) 516-1222.
Average Repair Cost for Kenmore Refrigerator Control Board Replacement
Replacing a Kenmore fridge control board can come with a hefty repair cost, especially in the city of San Diego.
In terms of minimum repairs or installation, one can expect to pay anywhere from $200 – $400 depending on the parts necessary and local labor rates. Complex repairs or installation could cost even more but it's hard to gauge without the exact specifications of the rest of the refrigerator.
There are complications that could add to the repair cost, such as the cost of new materials needed to replace the control board, added labor costs, and other technical difficulties that arise during the installation process. It’s important to inquire with a technician to get the full cost of what the repair will entail.
For San Diego residents looking for the best professional advice on fridge repair cost, it’s recommended to make a call to Local Reliable Appliance Repair at 866-516-1222.
Replacing Your Kenmore Refrigerator's Control Board with Reliable Appliance Repair
Replacing the control board in a Kenmore refrigerator may seem like a daunting task, but help is available from Reliable Appliance Repair. Their team of highly trained and experienced technicians can easily tackle the job.
Reliable Appliance Repair is a family-owned and operated, San Diego-based company providing top-of-the-line HVAC and appliance repair services. The team at Reliable has a minimum of five years of experience in the field and offers same-day services.
When it comes to Kenmore refrigerator control boards, Reliable stands out as the top choice. The company is licensed and insured, offering customers peace of mind – and the assurance that their repairs will be completed quickly and affordably.
Whether you need Kenmore refrigerator control board replacement or repair, you can trust Reliable. Their technicians hold customer service in the highest regard and will go above and beyond to make sure you are satisfied with the final results.
If you’re experiencing a malfunction in your Kenmore refrigerator, don’t delay. Contact Reliable Appliance Repair at (866) 516-1222 and get your refrigerator running smoothly again.
FAQ: DIY Guide: How to Replace the Control Board on Your Kenmore Refrigerator
Q1: What is a refrigerator control board?
A refrigerator control board is a computerized part that regulates the operation of the refrigerator, including setting the temperature and controlling the compressor.
Q2: What is a Kenmore refrigerator control board?
The Kenmore refrigerator control board is a computerized part that regulates the operation of the Kenmore refrigerator, including setting the temperature and controlling the compressor.
Q3: How can I replace my control board on my Kenmore refrigerator?
Replacing the control board on your Kenmore refrigerator is not a difficult task. First, you'll need to unplug the refrigerator, then unscrew the three screws on the back panel. Next, you'll need to remove the cover from the control board and remove the screws from the board. After that, you'll need to replace the board with a compatible model, and then replace the screws and cover to secure the control board.
Q4: What tools do I need to replace the control board on my Kenmore refrigerator?
To replace the control board on your Kenmore refrigerator, you'll need a Phillips screwdriver and appropriate replacement part.
Q5: What can I do if I encounter any difficulties while replacing the control board on my Kenmore refrigerator?
If you encounter any difficulties while replacing the control board on your Kenmore refrigerator, it's best to seek help from a qualified appliance repair professional. For reliable appliance repair help, call Local Reliable Appliance Repair at (866) 516-1222.