Reliable HVAC & Appliance Repair (866) 516-1222

Licensed HVAC & Appliance repair expert service


“Replacing the Control Board on Your Maytag Fridge”

Replacing the Control Board on Your Maytag Refrigerator

Replacing the control board on a Maytag refrigerator can be a confusing and daunting task. Fortunately, there are certain steps and processes you can follow to make the job easier and get the job done quickly. In this post, we’ll explain the process of replacing a control board on your Maytag fridge, as well as some other tips you’ll need to ensure a successful replacement.

Identifying the Faulty Control Board

To begin, you will need to determine if the control board is indeed faulty. This can be done by checking for a few common indicators. If you notice any of the following, then it’s time to replace the control board:

  • An error code on the display
  • Change in interior temperature
  • Interior light does not come on
  • Refrigerator does not run at all

Once you’ve identified the issue, you’re ready to move forward with replacing the control board.

Gathering All of the Necessary Parts

Before you begin the process of replacing the control board, be sure to have all of the necessary parts on hand. This will depend on the model of your Maytag refrigerator but generally include the following:

  • Control board assembly
  • Wiring harness
  • Clamps and screws

You’ll also need safety gear such as gloves, eye protection, and a face mask. All of these parts should be included in the new control board assembly, so you won’t need to order them separately.

Disconnecting Your Maytag Refrigerator

Before beginning the process of replacing the control board, you must first disconnect the power to the refrigerator. This should be done by switching off the circuit breaker in your home’s breaker box.

Once you have disconnected the power, you’ll need to remove the control panel of the refrigerator. Depending on the model of the fridge, this may require screws and/or a screwdriver. Carefully remove the screws and gently pull the panel away from the fridge. You may need to disconnect any wiring that holds the panel in place as well.

Installing the New Control Board

Now it’s time to install the new control board. First, make sure the harnesses on the new board are firmly connected. This can be done by firmly pressing the clips on the harnesses into the control board slots.

Once the harnesses are secure, you’ll need to mount the control board to the panel itself. Make sure the board is secured with clamps and screws, as well as insulated in the proper places.

Finally, you’ll need to reconnect the wiring. Make sure the connectors are firmly in place and the power is properly connected. This will ensure the refrigerator will be able to communicate with the new control board properly.

Finishing the Installation

Once the wiring and control board have been reconnected, you’ll need to make sure the panel is firmly secured to the refrigerator. This can be done by tightening all of the screws and making sure the panel is tightly secured to the fridge.

You can then switch the power back on, and the refrigerator should be running again. Test the refrigerator, and make sure the interior temperature is where it should be and the lights are on.

If you notice any issues even after replacing the control board, it’s best to call a qualified, local repairman to take a look. Oftentimes, even small issues can lead to bigger problems, and having a professional look at the fridge ensures it’s in top condition. If you’re looking for a great local repairman, try Local Reliable Appliance Repair at (866) 516-1222.

If you wish to read more information about Maytag Refrigerator Control Board Issues, click here.

Tips to Avoid Maytag Refrigerator Control Board Issues

Maintenance, when practiced regularly, can help reduce the risk of Maytag Refrigerator Control Board issues.

Schedule a Professional Inspection

It’s important to have a professional inspect the appliance at least once every 1-2 years. A technician will look for signs of wear and tear and will be able to diagnose and repair any potential problems.

Cleaning and Organizing

Cleaning and organizing the interior of the refrigerator regularly can help reduce the risk of system malfunctions. A buildup of dirt and dust can impede the refrigerator's ability to detect temperature changes and cause errors with the control board.

Replace Broken or Weak Parts

Any broken or weak parts should be replaced immediately, as they could be contributing to the malfunction. The technician should be able to identify any potential risks for Maytag Refrigerator Control Board issues and replace or repair the affected parts.

Look Out for Signs of Trouble

It’s important to keep an eye out for signs of potential problems, such as intermittent power issues, freeze-ups, loud noises, and more. If any of these signs are detected, it’s critical to call a reliable technician and have them inspect the issue.

Contact a Local Reliable Appliance Repair

If you’re looking for advice or a trusted technician to inspect and repair your Maytag refrigerator, consider calling Local Reliable Appliance Repair. Their technicians are experienced in dealing with Maytag Refrigerator Control Board issues, and they will be able to help you determine the best course of action.

Average Repair Cost for Maytag Refrigerator Control Board Issues in San Diego

Having trouble with your Maytag refrigerator control board? Calling a reliable appliance repair service can provide you with expert advice and help you decide on the best course of action. The average cost for the repair or installation of a Maytag refrigerator control board in the city of San Diego is between $220 to $1000.

Details: The repair or installation cost will depend on the complexity of the issue and whether new parts are required. The cost of the components is typically included in the repair charge. Depending on the cause of the malfunction, any of the following items may be needed: temperature sensors, pressure actuators, touch pads, power control boards, and fan blades.

For a thorough diagnosis and repair of a Maytag refrigerator control board issue, contact Local Reliable Appliance Repair at 866-516-1222.

Troubleshooting Maytag Refrigerator Control Board Issues

Maytag refrigerators run on a control board, and when this board malfunctions, the refrigerator may not cool properly or start at all. In these cases, it's important to find a qualified and reliable company to repair the issue and get your refrigerator back up and running. For appliance and HVAC repairs, San Diego customers can trust Reliable Appliance Repair.

Reliable is a family-owned, local HVAC and appliance repair company with a staff of highly-trained technicians. All our technicians have a minimum of 5 years of experience in the field, and we are licensed and insured. Our company also offers same-day service and affordable pricing, making us the ideal choice for all your appliance and HVAC repair needs.

When it comes to Maytag refrigerator control board problems, our technicians have the experience and knowledge to diagnose and resolve the issue quickly, so you can get your appliance back up and running. We can also provide maintenance services for your refrigerator to prevent future problems.

By choosing Reliable Appliance Repair, customers in San Diego can expect a friendly and skilled technician to show up at their location and provide top-level repair services. You won't have to wait days or weeks for us to come to diagnose the issue—our same-day services have you covered. So if you're dealing with Maytag refrigerator control board issues, contact Reliable Appliance Repair at (866) 516-1222 and let us take care of it for you.

FAQ: Replacing the Control Board on Your Maytag Fridge & Maytag Refrigerator Control Board Issues

Q. What is a refrigerator control board?

A refrigerator control board is an electronic device that regulates the cooling and defrost cycle of your Maytag fridge. It monitors the temperature, keeps the compressor running when needed and manages the lights, fans, and other components.

Q. What are the signs of a bad control board?

A damaged control board can present many symptoms, including cooling problems, funny noises, odd odors, and error codes. It can also cause your Maytag refrigerator to fail to start, not cool properly, not defrost, and not shut off.

Q. How do I know if I need to replace the control board for my Maytag fridge?

If your Maytag refrigerator is experiencing any of the symptoms mentioned above, you may need to replace the control board. To be sure, you should check the voltage of your fridge's electrical circuits and test its temperature and defrost cycles.

Q. How do I replace the control board in my Maytag fridge?

Replacing the control board in a Maytag refrigerator is a complicated process which should ideally be done by a professional. However, if you're comfortable performing repairs, you should begin by testing the voltage of the electrical circuits, unplugging the fridge, and then removing the control board. Next, you'll need to reconnect the wiring and secure the new control board with clips or screws.

Q. Where can I get help with replacing the control board for my Maytag fridge?

If you require assistance replacing the control board of your Maytag refrigerator, it's best to contact a local and reliable appliance repair service. At Local Reliable Appliance Repair, we specialize in Maytag refrigerator repair and can help you with all parts of the control board replacement. For more information, feel free to call us at (866) 516-1222.