Reliable HVAC & Appliance Repair (866) 516-1222

Licensed HVAC & Appliance repair expert service

Test

Why Is My Whirlpool Refrigerator Not Cooling?

Why Is My Whirlpool Refrigerator Not Cooling?

Nobody wants their food to go bad and so it can be immensely frustrating when your Whirlpool refrigerator starts to malfunction. Whether or not temperatures are off or your food is defrosting too fast, chances are there’s an underlying issue that needs repair. Before you take the plunge and call in a professional refrigerator repair technician, it’s best to try to do a little troubleshooting of your own to help narrow down possible root causes.

Common Reasons why Whirlpool Refrigerators Don't Cool

The most common reason a Whirlpool refrigerator does not cool is if it was installed in an area with insufficient airflow. All Whirlpool refrigerators need a few inches of space around the sides and top of the unit for proper cooling. If the refrigerator is too close to the walls, or blocking other objects or vents, airflow might be restricted and cause a breakdown in cooling within the unit.

The second most common reason refrigerators have trouble cooling is when the condenser coils are dirty. The condenser coils are black in color and located on the back of the refrigerator. If the coils are not cleaned on a regular basis, the unit will not be able to cool properly.

Noisy refrigerators are sometimes due to worn-out fan blades. These should be inspected and replaced as necessary. There may also be an obstruction preventing the fan blades from spinning as they should be. These can range from a can of soda wedged behind the fan to a stylus built up in the copper tubing.

If all of the above solutions fail, then the next step is to check the evaporator fan motor. If the fan motor is not operating properly, the unit will not cool properly. The evaporator fan motor is located at the back of the unit behind the fan blades. You will need to remove the fan blades to access the fan motor.

Troubleshooting Your Refrigerator

If you’ve found that the refrigerator unit is blocking airflow or if the condenser coils are dirty, the first step is to correct this and allow the unit to cool properly. Meanwhile, be sure to disconnect your refrigerator before doing any cleaning or repair work. Wiping down the condenser coils on a regular basis can help ensure proper cooling and efficiency.

If you’ve checked all of the above and still have trouble cooling your refrigerator, you will then need a professional to inspect the evaporator fan motor. The evaporator fan motor is responsible for circulating air around the refrigerator, as well as aiding in cooling the unit.

It is not recommended to attempt to replace the fan motor on your own, as there may be other reasons causing the issue and you do not want to void the warranty of your refrigerator.

Getting Professional Help

If all else fails and your Whirlpool refrigerator is still not cooling properly, then it is time to call in a professional refrigerator repair technician. These technicians are trained to diagnose, troubleshoot, and repair any refrigerator problems or malfunctions.

Local Reliable Appliance Repair can help you out, they are the most experienced appliance repair technicians and take pride in providing fast and reliable service. If your Whirlpool refrigerator is experiencing cooling issues, contact Local Reliable Appliance Repair at (866) 516-1222 Our team at Local Reliable Appliance Repair of San Diego provides fast, reliable, and professional refrigeration services for all types of makes and models of refrigerators, so don’t put it off any further and give us a call today.

If you wish to read more information about Whirlpool Fridge Not Cooling click here.

Why Is My Whirlpool Refrigerator Not Cooling?
Why Is My Whirlpool Refrigerator Not Cooling?
Why Is My Whirlpool Refrigerator Not Cooling?

Whirlpool Fridge Not Cooling: Manufacturer and Local Technician Recommendations

If you own a Whirlpool fridge and it is not cooling, there are a few preventive action steps you can take to avoid this costly issue. Here are manufacturer and local technician recommendations to help you avoid faulty cooling:

  1. Check the temperature settings: Make sure your refrigerator is set to the right temperature. Generally, the recommended fridge temperature is 35-38ºF and the freezer temperature is 0-5ºF.

  2. Check the condenser coils: Move any dust, dirt, pet fur, and lint that may have accumulated around the condenser coils. This helps keep your fridge operating efficiently.

  3. Check the evaporator fan motor: Make sure the evaporator fan motor is working properly. Many models require that the fan motor is replaced at least once a year.

  4. Check the door gaskets and seals: Make sure the door gaskets and seals are not broken, worn out, torn, or loose. If they are, they should be replaced.

  5. Check the ice maker: Make sure the ice maker's water supply line is connected. If it isn't, make sure it is hooked up properly. Once that is done, check if the ice maker has enough water.

  6. Clean the refrigerator: Regularly clean your refrigerator to ensure optimal performance. Remove all food, shelves, and drawers and wipe the interior with a mild detergent and warm water.

  7. Call a local technician: If your fridge is not currently cooling, it is best to contact a local service technician for assistance. A reliable appliance repair technician can diagnose and fix the issue for you. This helps ensure the best outcome and provides you with peace of mind.

If you are looking for a local technician in the San Diego area, consider contacting Local Reliable Appliance Repair for professional assistance.

Following these preventive steps can help you avoid costly issues related to a Whirlpool fridge that isn’t cooling. Make sure to properly maintain your refrigerator and contact a technician when necessary to maximize its efficiency.

Average Repair Cost for "Whirlpool Fridge Not Cooling"

Finding a reliable repair service to fix a broken Whirlpool refrigerator can be a challenge. The average repair cost in San Diego can vary from simple replacement parts to complex installation. Parts that may be necessary may include: condenser fan motors, evaporator fan motors, thermostats, and sometimes a control board. Repair costs can range from a minimum of $50 to several hundred dollars depending on the complexity of the work needed.

To ensure a quality repair with no additional issues, it is wise to use an experienced and licensed technician to assess the situation and provide an estimate before going forward with the repair. To get an estimate, schedule a repair with Local Reliable Appliance Repair at (866) 516-1222, or contact them using the phone number provided. Materials for repair will also be calculated into the overall cost of the job.

Anytime a refrigerator does not cool, it is imperative to have it assessed and repaired as soon as possible. Living without a functioning refrigerator for even a day can be a challenge and can result in having to buy groceries twice. The type of repair needed is important to have determined so that the correct parts and labor can be utilized. With the help of a licensed and experienced technician the problem can be resolved quickly and correctly.

A Solution to the Problem of Whirlpool Fridge Not Cooling

No one wants to be in a situation where their Fridge is not properly cooling. It can be extremely inconvenient and even dangerous. Thankfully, there are experienced repair service providers like Reliable Appliance Repair that can take care of this problem.

Reliable Appliance Repair: A Family-Owned San Diego HVAC and Appliance Repair Company

Reliable is a local family-owned HVAC and Appliance Repair service provider in the San Diego area. They provide same-day solutions for refrigerator repair, in addition to other services for HVAC and appliances.

Their technicians are highly trained, with a minimum of 5 years' experience in the field. They understand how to handle a wide variety of problems, including Whirlpool Fridge Not Cooling. Most importantly, Reliable offers Fair and Affordable Pricing, ensuring quality service without breaking the bank.

Customer Benefits

Reliable offers quality customer services that make the repair process simpler and faster. They provide same-day service and are equipped to handle the more intricate problems, such as Whirlpool Fridge Not Cooling. Reliable is also a licensed and insured company, providing customers with a sense of safety and assurance of quality service.

Overall, Reliable Appliance Repair is an excellent local family-owned company for HVAC and Appliance service. It provides same-day solutions and is highly trained and licensed; it also offers Fair and Affordable Pricing. So, if you want your Whirlpool Fridge Not Cooling problem solved quickly and easily, go with Reliable Appliance Repair: dial (866) 516-1222.

FAQ: Why Is My Whirlpool Refrigerator Not Cooling? and Whirlpool Fridge Not Cooling

What would cause a Whirlpool fridge not to be cooling?

Several things could be preventing your Whirlpool refrigerator from cooling properly. Potential issues include a failed compressor, condenser fan, temperature settings, or a buildup of dust and debris.

How do I fix a Whirlpool refrigerator that's not cooling?

If the fridge is not cooling, start by checking the power cord, temperature settings, and coils. If those are all fine, you may need to replace or clean the condenser fan, evaporator fan, or compressor. If you’re not sure what to do, it’s best to call a professional.

What are the common causes of a Whirlpool refrigerator not cooling?

The most common reasons for a Whirlpool refrigerator not cooling are either a failed compressor, condenser fan, or temperature setting. Other possible causes are a clogged drain tube, blocked airflow, or buildup of dust and debris.

What temperature should a Whirlpool refrigerator be set to?

Ideally, the temperature of your Whirlpool refrigerator should be around 36-38°F, while the freezer should be at 0°F or a bit lower. If your refrigerator is too warm, turn down the temperature.

What do I need to do if my fridge is not cooling enough?

If your Whirlpool refrigerator is not cooling enough, you’ll need to check the power cord, temperature settings, and coils. If all of those are working, you may need to replace the condenser fan, evaporator fan, or compressor. If you’re not sure what to do, it’s safest to call a local, reliable appliance repair service.

If your Whirlpool refrigerator isn’t cooling, don’t wait! Contact Local Reliable Appliance Repair at (866) 516-1222 now.