Reliable HVAC & Appliance Repair (866) 516-1222

Licensed HVAC & Appliance repair expert service

DIY Guide Repairing Your KitchenAid Microwave

DIY Guide: Repairing Your KitchenAid Microwave

DIY Guide: Repairing Your KitchenAid Microwave

When it comes to complicated appliance repairs, most people shy away from attempting it on their own, fearing they may make an even bigger mess. In reality, however, fixing the most common kitchen appliance, the KitchenAid Microwave, is actually far simpler than you might think.

With the right knowledge and guidance, you can easily take on a kitchen appliance repair job with confidence and success. And that's why we're here to bring you this helpful DIY guide to repairs your KitchenAid Microwave.

Be sure to check your KitchenAid Microwave manual instructions before beginning any of the repairs mentioned below. Safety first!

1. Unplug the Appliance

Your KitchenAid Microwave should always be unplugged from the power source before attempting any repair. This will help avoid any potential electric shock or damage to the appliance itself.

2. Identify the Problem

Before beginning any kind of repairs on your KitchenAid Microwave, you'll need to be able to identify the problem. First, determine what is causing the disruption and malfunction to your KitchenAid Microwave. This could be anything from a faulty light bulb to an old worn-out fuse.

3. Replacing a Bulb

Once you have discovered the faulty bulb, you will need to replace it. Most KitchenAid Microwaves come with a spare bulb made specifically for them.

Carefully unscrew the old bulb and replace it with the new one. Make sure to re-assemble the appliance properly and plug it back into the power source.

4. Cleaning the Fan

Most KitchenAid Microwaves have a small fan that helps keep the appliance running properly. Over time, however, buildup of dust, dirt, and debris can clog up the fan, making it less effective.

The best way to ensure your KitchenAid Microwave fan is running in optimal working condition is to clean it periodically. This can easily be done with a vacuum, a soft brush, or a damp cloth.

Be careful not to damage the fan when cleaning.

5. Checking the Fuse

It's important to check the fuse of your KitchenAid Microwave regularly. A worn-out fuse can stop the appliance from functioning properly and can even cause damage.

If the fuse on your KitchenAid Microwave appears to be old and rusty, you may need to replace it with a new one. Many appliance stores carry fuses designed specifically for KitchenAid Microwaves.

Carefully take out the old fuse and replace it with the new one. Making sure the power to the appliance has been turned off beforehand.

6. Have a Professional Take a Look

In some cases, no matter how much DIY tinkering you do, some repairs are just too complicated for a novice. If you can't seem to get your KitchenAid Microwave working correctly, there's no shame in having a professional take a look.

A professional repairman will have the skills, knowledge and experience to identify the problem and fix it quickly and efficiently.


In conclusion, repairs to your KitchenAid Microwave are not as difficult as you might think. With the right guidance, you can easily attempt common repair jobs in the safety and comfort of your own home.

While it is important to have a basic understanding of appliance repairs, make sure not to be overconfident and attempt any complicated repairs. In these cases, it is best to contact a professional who can take care of the problem promptly and competently.

This DIY guide to repairing your KitchenAid Microwave has hopefully shed some light on the issue and got you one step closer to getting your appliance up and running. Good luck!

DIY Guide: Repairing Your KitchenAid Microwave
DIY Guide: Repairing Your KitchenAid Microwave
DIY Guide: Repairing Your KitchenAid Microwave

KitchenAid Built-in Microwave Repair Recommendations:

1. Clean and Inspect the Microwave on a Regular Basis

Regularly inspecting and cleaning your KitchenAid built-in microwave is an important preventive measure that can help to avoid major issues. Running a damp cloth over the microwave is usually enough to remove dust and residue from the surface. Make sure to clean the interior of the microwave with a dish-washing liquid solution, being sure to avoid any harsh scrubbing which could damage the inner components.

Additionally, if you notice any crystals, rust, or paint chips, these should be addressed as soon as possible.

2. Ensure that the Exhaust Vent Hose is Connected and Not Blocked

Make sure that the exhaust vent hose remains unblocked, as blocked ventilation can cause the microwave to shut itself off or overheat. It is important to ensure that the vent hose remains securely connected to the back of the microwave, and to regularly inspect the hose for any signs of wear or damage.

3. Check the Door Seal

A worn or damaged door seal will lead to improper airflow and cold spots in the microwave. Regularly check the door seal to make sure that it is not cracked or torn, and replace it if necessary.

4. Stay Alert for Unusual Noise or Smells

Noises and smells coming from the microwave can indicate a malfunction, so pay attention to any strange sounds or smells that the microwave may be making. If you notice any irregularities, have the microwave serviced or inspected by a professional immediately.

5. Contact a Professional for Repair or Maintenance

If you experience any significant issues with your KitchenAid built-in micorwave, it is best to contact a professional for repair or maintenance. Working with a local appliance or HVAC technician can help to ensure that the repair is done correctly and safely.

KitchenAid Built-in Microwave Repair Costs in San Diego

Having trouble with your KitchenAid built-in microwave? You don't have to experience costly and time-consuming repairs. Knowing the average repair cost, installation and labor costs, and most commonly replaced parts can help you determine whether a repair is right for you.

For repairs in San Diego, the minimum repair or installation cost is typically around $75. Complex repairs or installations can cost up to $400 and beyond. Parts tend to be the biggest cost, while labor charges usually range from $50–$100/hour. The cost of materials needed will vary significantly depending on the magnitude of the repair.

The most commonly replaced parts for a KitchenAid built-in microwave include:

  • Turntable motor: ~$50
  • Touchpad: ~$75
  • Vent fan motor: ~$80
  • Door handle: ~$45
  • Magnetron: ~$175
  • High-voltage transformer: ~$90

Keep in mind that the cost of repair or replacement parts can vary depending on the specific type of microwave and age of the appliance. Moreover, complex repairs can differ in cost depending on factors like the location of the appliance, the type of service being performed, and the parts required

For the best professional advice, contact Local Reliable Appliance Repair at tel: (866) 516-1222. They provide repair solutions to San Diego and its surrounding area, and they offer a variety of services and parts to repair your KitchenAid microwave.

Repair Your KitchenAid Built-In Microwave Easily With Local Reliable Appliance Repair

If you're facing a problem with your KitchenAid built-in microwave, don't despair – help is at hand. The experienced and highly-trained technicians at Reliable Appliance Repair can help you by providing quick and affordable repair services. With over 5 years of experience in the field, this family-owned local San Diego HVAC and Appliance Repair company can get your microwave back up and running in no time.

At Reliable Appliance Repair, they understand how important it is for homeowners to have their appliances working properly. That's why they provide same-day services and offer fair and affordable pricing solutions. Plus, they offer a $25 off labor incentive to first-time customers, meaning you can get a quality repair without breaking the bank.

So if you need KitchenAid built-in microwave repair, don't wait around – contact Reliable Appliance Repair today! Call them on tel:(866)516-1222 to start getting your kitchen back in shape, and enjoy the peace of mind that comes with superior maintenance.

FAQ: Repairing Your KitchenAid Microwave and KitchenAid Built-in Microwave Repair

What preparation is needed before attempting to repair a KitchenAid Microwave?
Before attempting to repair a KitchenAid microwave, be sure you're well prepared: consult the product manual, gather the necessary tools and replacement parts, and disconnect the power source.

What are commonly reported outcomes of DIY repair?
When repairing a KitchenAid microwave yourself, many people report a successful outcome—including greater energy efficiency, increased performance, and a nearly silent microwave.

How long does it typically take to repair a KitchenAid Microwave?
The time required to repair a KitchenAid Microwave varies depending on the complexity of the issue and the repair needed. On average, however, it will take 2-3 hours to perform the repair.

Are replacement parts expensive to purchase?
On average, replacement parts for KitchenAid microwaves can range from approximately $50 – $200, depending on the model and the nature of the repair.

What are potential hazards that I should be aware of when repairing a KitchenAid microwave?
When repairing a KitchenAid microwave, potential hazards include electric shock and microwaves leaking radiation when exposed to the outside environment. Be sure to use the necessary safety precautions—such as unplugging the microwave and wearing a glove—before attempting any repairs.

What should I do if I'm not comfortable with my DIY repair attempt?
If you are not comfortable with your DIY repair attempt, you should consider calling Local Reliable Appliance Repair at (866) 516-1222 for assistance.