Reliable HVAC & Appliance Repair (866) 516-1222

Licensed HVAC & Appliance repair expert service

How to Clean Built In Microwave Vents

How to Clean Built-In Microwave Vents

How to Clean Built-In Microwave Vents

Having a built-in microwave in your home is convenient, but it’s important to regularly clean the vents to ensure proper ventilation and air circulation. The vents can accumulate dust, bits of food, or grease, so cleaning them is essential for avoiding a potential hazard.

Luckily, cleaning the vents on built-in microwaves is easy. With just a few simple tools, you can remove the vents, give them a thorough cleaning, and reinstall them in no time, helping to keep your kitchen clean and safe.

What You’ll Need

To clean built-in microwave vents, you will need the following tools:

  • Vacuum cleaner
  • Soap and water
  • Plastic spatula
  • Paintbrush

Steps for Cleaning Built-In Microwave Vents

Step 1: Turn off the Microwave

Before you start to remove the vents, be sure to turn off your microwave. Unplug it or disconnect it from the electrical outlet to ensure it’s completely off before proceeding.

Step 2: Remove the Filter

Carefully remove the vents from the microwave and set them aside. To do this, use a plastic spatula to gently pry the vents off the front of the microwave. Once the vents have been removed, set them aside.

Step 3: Vacuum the Area Behind the Filter

Once the vents have been removed, use a vacuum cleaner to suck up any dirt, dust, or crumbs that have accumulated behind the filter. Be sure to get into all the nooks and crannies.

Step 4: Clean the Filter

Fill a sink with soapy water and submerge the vents in the water. Use a paintbrush to scrub the vents to get any residue off. Let the vents soak in the soapy water for several minutes, then rinse them with clean water.

Step 5: Dry and Reinstall the Filter

Once the filter has been thoroughly cleaned, dry it with a towel. Then, reinstall the filter back onto your microwave following the same steps you used to remove it. Make sure the vents are securely in place.

Final Thoughts

Cleaning the vents on built-in microwaves is an easy task that can be done in minutes. By regularly cleaning the vents, you ensure the proper ventilation and air circulation, helping to keep your kitchen clean and safe. With these simple instructions and just a few basic tools, you can quickly and easily make sure your built-in microwave vents are clean and clear.

How to Clean Built-In Microwave Vents
How to Clean Built-In Microwave Vents
How to Clean Built-In Microwave Vents

Cleaning built-in microwave vents

Manufacturers and local appliance or HVAC technicians in San Diego commonly recommend the following preventative actions to help avoid Cleaning built-in microwave vents issues:

  • Check the User Manual: Consult the user manual for detailed instructions regarding your specific microwave model.

  • Regularly Examine the Vent: Regularly inspect the vent cover and filter to ensure they are clean, clear of food residue, and any signs of wear or damage.

  • Schedule Professional Cleanings: Have a professional HVAC technician service your built-in microwave vents every six months to ensure optimum performance and minimize potential issues.

  • Clean Gently: Use a soft-bristle brush or vacuum cleaner with a narrow attachment neck to clean the vents, and wipe down the exterior with a damp cloth. Avoid using harsh chemicals or abrasive cleaning materials.

  • Check the Exhaust Fan: Check the exhaust fan and ensure that it is free from debris or blockages. Examine the fan blade to make sure it is situated correctly and running smoothly.

  • Replace Filters Regularly: Replace the filter in your built-in microwave vent in accordance with the manufacturer’s recommendation.

  • Keep the Hot Air In: Caulk around the vent and inspect its seals to ensure hot air is being kept inside the oven and not leaking into the kitchen.

By following these recommendations, you can help ensure that your built-in microwave vent runs efficiently and helps avoid any potential Cleaning built-in microwave vents issues.

Average Cost of Cleaning Built-in Microwave Vents in San Diego

When it comes to cleaning built-in microwave vents, the cost of repair in San Diego can vary depending on the amount of work and parts needed. The minimum repair cost is the cost of labor, which usually falls between $50 and $80, while complex repairs may require more parts and cost up to $200. When trying to calculate the repair cost, it is important to factor in the cost of parts as well. To identify the most commonly replaced parts, a detailed list would include:

  • Fan motor: these are responsible for circulating air in the microwave, and cost $40-60 to replace.
  • Grease filters: these trap grease or food vapors, and cost around $10.
  • Blowers and switches: these manage the fan and light power, and cost around $50.
  • Cooling fan assembly: this helps to reduce heat buildup, and cost around $70.

These estimates do not include the cost of materials. It is also important to consider any other details necessary for the repair, such as accessing the microwaves hidden behind walls. For the best professional advice, it is recommended to call a reliable appliance service provider in San Diego, such as Local Reliable Appliance Repair.

Cleaning Built-In Microwave Vents

Keeping your microwave clean is essential for the safety and wellbeing of your family. But if the vents of a built-in microwave are clogged, it can be an especially difficult cleaning task. Professional help is needed, and that’s when a local San Diego HVAC and appliance repair family-owned local company, like Reliable, comes in.

The technicians at Reliable all have a minimum of 5 years of experience in the field and are constantly dealing with built-in microwave vents. Not only that, but their services are reliable, professional, and affordable. They offer same-day service, and as an incentive for new customers, they’re offering a $25 discount on labor.

Reliable isn’t just invested in cleaning your microwave vents, they’re also invested in your safety. Their technicians are all highly trained and certified. Plus, they are licensed and insured, giving you peace of mind.

If you’re in need of any cleaning built-in microwave vents services in the San Diego area, then reach out to Reliable. They have the experience and the commitment to quality you need for the job. Plus, their competitive prices and discounts make professional service more attainable than ever. To reach them and take advantage of the $25 discount, call (866) 516-1222.

FAQ: How to Clean Built-In Microwave Vents

What supplies are needed to clean built-in microwave vents?

You'll need a soft cloth, mild dishwashing detergent, tap water, and an old toothbrush.

How can I reach vents to properly clean them?

Using a soft cloth, wipe down the exterior vent, going in circular motions. For vents that are difficult to access, dip your toothbrush into the soap and water solution, then gently scrub away dirt.

How can I prevent build-up in microwave vents?

To prevent build-up, regularly remove your vent filter and gently wipe it with hot, soapy water. If the filter needs a deep clean, soak it in a sink filled with hot water, a few tablespoons of dishwashing liquid, and a cup of white vinegar.

Are there any dangers of improper cleaning?

Yes. Improper cleaning could cause a malfunction in the mechanics of your microwave. Therefore, it's best to avoid spraying any liquids or chemicals directly into the ventilation slots.

Call Local Reliable Appliance Repair at (866) 516-1222 for further assistance.