Reliable HVAC & Appliance Repair (866) 516-1222

Licensed HVAC & Appliance repair expert service

Tips for Maintaining Your Built In Microwave

Tips for Maintaining Your Built-In Microwave

Tips for Maintaining Your Built-in Microwave

Installing a built-in microwave can be a great way to enhance the aesthetic of an appliance suite in a kitchen. But with any appliance, it is important to make sure that it is maintained properly in order to ensure its safe operation. Here are some tips for properly maintaining your built-in microwave.

Clean Regularly

One of the most important aspects of keeping your built-in microwave in top condition is regularly cleaning it. The best way to do this is to use a soft cloth and warm, soapy water. A vinegar and water solution can help remove any tough, baked-on residue. It is best to wipe the interior of the microwave after each use as this will help keep it free from any splatters or spatters that may accumulate during cooking. Be sure to unplug the appliance before cleaning and make sure any surfaces that have been cleaned are completely dry before plugging the microwave back in.

Change the Filters

A built-in microwave that has been used for a significant amount of time may require new filters. Filters can often become clogged with dirt and debris that accumulate during cooking, so it is important to inspect and change the filters if necessary. Depending on the model of the microwave, the filters can be located either in the interior of the appliance or externally. Always consult the owner’s manual to determine the exact location and how to properly remove and replace the filters.

Eliminate Odors

Over time, built-in microwaves may develop odors due to cooking certain food items. There are a few ways to eliminate these odors. The first is to use kitchen cleansers such as dish soap and water or a commercial kitchen cleaner to wipe down the surfaces of the microwave. Another option is to fill a bowl with lemon or orange slices, fill it halfway with water, and set it inside the microwave, then turn the microwave on for a few minutes. This will help remove any lingering odors.

Check for Damaged Components

It is also important to periodically check the interior of the microwave for any worn parts or damaged wires. Regularly inspect the door, the door insulation, the handle and hinges, the door cable, and other items. If any of these parts appear to be frayed or worn, it is important to replace them as soon as possible with genuine parts in order to avoid any potential hazards.

By following these maintenance tips and regularly inspecting the built-in microwave, users can help ensure their safety, as well as the longevity of the appliance. With proper preventive maintenance, a built-in microwave can offer many years of reliable, trouble-free use.

Tips for Maintaining Your Built-In Microwave
Tips for Maintaining Your Built-In Microwave
Tips for Maintaining Your Built-In Microwave

Maintaining built-in microwave

*PLEASE Note * that it's always best to consult with an appliance or HVAC technician in the San Diego area for preventive action before any repairs are necessary as each situation is unique.

PLEASE Follow these Basic Guidelines to Maintain your Built-In Microwave:

  • PLEASE Clean the interior and exterior of the microwave regularly. Use warm soapy water and a soft sponge or cloth for the interior and a damp cloth for the exterior. If there is excessive grease or buildup, use a degreasing agent that is meant to be used on appliances.

  • PLEASE Change the air filter regularly. Clean filters should be changed every 3 to 6 months, depending on how often the microwave is used. Check the manufacturer's instructions for additional guidance.

  • PLEASE Ventilate the kitchen when using the oven. Make sure the ventilation system is working properly and the exhaust is vented to the outside of the house. This will help reduce grease and smoke from entering the oven and build up in the fan and other parts.

  • PLEASE Inspect the door, seal, and latch regularly. Look for signs of wear, damage, or loose parts that could cause the seal to not work properly. Replace worn seals or damaged latches as necessary.

  • PLEASE Periodically check the torque of the screws on the microwave. Over time, screws can become loose and need to be tightened.

  • PLEASE Test regularly to make sure the microwave is working correctly. This can be done by setting different lengths of time and then checking to see if the food is cooked properly.

PLEASE Note that these tips can help keep your microwave in good condition and prevent any potential problems from occurring. However, it is still important to have a qualified technician inspect and service the microwave on an annual basis. This will ensure that all components are running correctly and any issues can be addressed before they become a problem.

Maintenance for Built-in Microwaves: Price and Parts

Repairing built-in microwaves can be a costly endeavour for homeowners and property owners in San Diego. Typical repair or installation costs depend on the complexity of work and the parts required. For the most reliable estimate, it is recommended to call a local, reliable appliance repair service such as Reliable Appliance Repair at (866) 516-1222.

The most commonly replaced parts include coils, motors, lightbulbs, touchpads, and door switches. The cost of these parts can range from $30 to $250, while installation requires more labor and time. Labor costs typically range from $50 to $150, depending on the intricacy of the repair. Materials, such as screws and adhesives, can add an additional $20 to $50.

In sum, the typical cost of maintaining a built-in microwave in San Diego can range anywhere from $100 to $400 for simple replacements and repair, or $200 to $500 for complex repairs. Keep in mind that costs can vary widely and depend greatly on the particular model and the extent of repairs needed.

When looking for reliable appliance repair services in San Diego, be sure to call Reliable Appliance Repair at (866) 516-1222 for the most reliable estimates.

Maintaining Built-In Microwave

Taking care of your built-in microwave is essential for its longevity. Without regular check-ups and maintenance, some breaks, malfunctions, and even fires are possible. To avoid this, it's important to consult with a reliable appliance repair service and get your built-in microwave maintained today.

The Benefits of Hiring a Reliable Appliance Repair

Reliable Appliance Repair is a family-owned company in San Diego offering fast and quality appliance repair. As a first-time customer, you can get a $25 discount on the labor.

Their technicians are highly-specialized and have, at least, 5 years of experience in the field. They can provide fast, same-day repairs and installations and include honest and fair pricing. They are also licensed and insured.

From handling common issues to maintaining built-in microwaves, they are your reliable source for appliance repair and installations. Contact Reliable Appliance Repair today and get the job done in no time.


Keeping your built-in microwave running smoothly and safely requires regular maintenance. It's important to get it maintained by a reliable repair service you can trust. Reliable Appliance Repair in San Diego is one such option that offers both quality and convenience at an affordable rate. With their highly trained and experienced technicians, you can trust them for fast, same-day repairs. As a first-time customer, you can even get a $25 discount on labor. So why wait? Contact Reliable Appliance Repair today and get your built-in microwave checked.

FAQ: Tips for Maintaining Your Built-In Microwave

What should I do to maximize the life of my built-in microwave?

To extend the life of your built-in microwave, make sure to clean it regularly and avoid overcrowding the interior. Remove any spills or stains immediately with a damp towel or cloth. Make sure to check for any damage or wear around door seals and air vents.

How should I clean my built-in microwave?

The best way to clean your built-in microwave is to use natural ingredients such as baking soda and vinegar to avoid harsh chemicals. Simply mix baking soda and water to form a paste, then spread it over the interior surfaces. Allow the paste to sit for some time before wiping away with a damp rag or cloth. Afterward, use a cloth and vinegar to get rid of any lingering odors.

Is it necessary to remove the microwave plate?

Yes, it is essential to remove the plate of your built-in microwave during cleaning. This will help you clean all of the interior surfaces thoroughly and ensure that no food remains on the plate.

Are there any special care instructions when using my built-in microwave?

Yes, when using your built-in microwave, it is important to avoid overcrowding the interior, to ensure even cooking. You should also be sure to use cooking materials that are suitable for microwaves and adhere to the manufacturer’s guidelines for cooking times, temperatures, and power levels.

For any maintenance or repair needs, please contact Local Reliable Appliance Repair at (866) 516-1222.