Reliable HVAC & Appliance Repair (866) 516-1222

Licensed HVAC & Appliance repair expert service

How to Fix Built In Microwave Buttons Not Working

How to Fix Built-In Microwave Buttons Not Working

How to Fix Built-In Microwave Buttons Not Working

If you've noticed that the buttons on your built-in microwave aren't working as expected, you have likely realized that it won't shut off or that it won't start. It's an irritating problem, but fortunately, it's an easy one to fix. In this article, we share our step-by-step guide on how to solve this issue.

Step-By-Step Guide to Fix a Malfunctioning Built-In Microwave

  1. Unplug the built-in microwave – Unplugging the microwave will help avoid any electricity issues and keep you safe while troubleshooting the issue.

  2. Clean the buttons – It is important to start by cleaning the buttons. Make sure you do so with a soft rag and either a mild detergent or a natural cleaning solution.

  3. Check the wiring – If the situation persists, it is time to take a closer look. Carefully remove the panels of the unit, locate the wiring and make sure it is in place and secure. If not, then the wiring should be fixed or replaced.

  4. Replace the buttons – If the buttons have obviously malfunctioned, then the easiest solution is to replace them. You can do this yourself or contact a professional to do it for you.

  5. Check the circuits – Before reconnecting the microwave, check the circuits. This is especially important when the microwave has been unplugged and circuits can easily go out of alignment in the meantime, leading to problems with your microwave buttons.

  6. Replug the microwave – Now that everything is checked and fixed, you can safely plug the microwave back in and check the buttons. Your microwave should now be working as expected.


We hope our step-by-step guide on how to fix built-in microwave buttons not working was helpful. It is important to always be careful when troubleshooting a built-in microwave and never hesitate to contact a professional if you're not sure what to do.

How to Fix Built-In Microwave Buttons Not Working
How to Fix Built-In Microwave Buttons Not Working
How to Fix Built-In Microwave Buttons Not Working

Preventive Action to Avoid Built-in Microwave Buttons Not Working in San Diego

1. Clean Buttons

To avoid the issue of built-in microwave buttons not working, it is important to keep the buttons clean. This can be done by taking a damp cloth and wiping down the buttons. For an especially thorough clean, a small amount of dish soap can be used.

2. Remove Grease or Oil From Buttons

When grease or oil from cooking with the microwave accumulates on the buttons, it can cause them to stick or not work properly. It is important to wipe away this grease or oil from the buttons on a regular basis to avoid those issues.

3. Check For Loose Connections

Loose connections can render the panel of a built-in microwave unresponsive. To prevent this from occurring, it is important to make sure all connections are secure.

4. Follow Manufacturer Recommendations

It is important to follow the manufacturer’s recommendations when troubleshooting built-in microwave buttons not working. This includes ensuring that the user manual is consulted when cleaning or making repairs.

5. Hire A Local HVAC Technician

If the issue persists despite the above mentioned steps, it may be useful to contact a local HVAC technician to assess the issue. They will be able to provide professional advice and assistance to get the microwave functioning properly again.

Repair Cost for "Built-in Microwave Buttons Not Working"

If you are experiencing issues with buttons not working on your built-in microwave oven, you will likely require professional repair. In the city of San Diego, the minimum repair cost is likely around $108 while a more complex repair can run up to around $220.

Most commonly replaced parts in this repair include a new control panel, door switch, timer/clock unit, diode, fuse, magnetron tube, or fan motor. It's possible that other components may need to be replaced as well, depending on the specific issue.

The cost of the repair in San Diego is a combination of parts and labor. Replacing a single part such as a door switch should cost around $50-60 for parts plus an additional $50-60 for the labor. More complex repairs, such as replacing the control panel, will likely have parts costs of around $120-160 plus labor costs of $50-60. The cost of materials varies depending on the specific brand, model, and part being replaced.

For reliable appliance repair services in San Diego, we recommend calling Local Reliable Appliance Repair at (866) 516-1222. They offer professional and efficient repair services, and they always use high-quality spare parts.

Having Built-in Microwave Buttons Not Working?

Having problems with your built-in microwave buttons not working? Look no further than your local San Diego company – Reliable Appliance Repair! As a family-owned business, Reliable offers same-day services and unbeatable value, with licensed and insured technicians who have a minimum of 5 years of experience.

You can trust Reliable for dependable and professional service. They specialize in all types of appliance and HVAC repairs and installations. As a first-time customer, you can get $25 off on labor costs.

It's comforting to know that you don't have to go on a wild goose chase – Reliable can help you with whatever built-in microwave buttons not working problems you may have. Their commitment to customer satisfaction and advancement in the craft is why they continue to be a trusted name in the field. So if you're stuck with built-in microwave buttons not working, don't hesitate to contact Local Reliable Appliance Repair today at tel:(866) 516-1222.

FAQ: How to Fix Built-In Microwave Buttons Not Working

What should I do if my built-in microwave buttons don’t work?

Check the power source first. Unplug the appliance and wait for a few minutes before plugging it back in. If that doesn't work, check the external buttons to make sure there is no debris. Remove any blockage, like dirt, grease or crumbs and try to press the buttons again.

What might be the cause of non functioning built-in microwave buttons?

The possible cause could be a defective keypad, worn out push buttons, or a loose connection.

How can I check if the microwave buttons are broken?

Look for evidence of damage or corrosion physical damage. Examine if the buttons move freely, and check if the connection looks worn or damaged.

If the issue persists, what further measures can I take?

You can perform a circuit check. Unplug the microwave, and check if the continuity of the electrical connection on the keypad. If not, you could have an issue with the circuit board.

If the issue is more complicated, it is best to call a local, reliable appliance repair specialist, like Local Reliable Appliance Repair at (866) 516-1222.